Show me some Savages in PRS/NRL

[SoCal326]

Can anyone point me to examples of Savages being used in PRS/NRL. I'm just getting started and I'll be using the 12LRP with an extended bolt handle and the KSS enhanced extractor/ejector kit

I've heard a few negative comments about using Savages in PRS type matches. The argument is that when running them hard they have a few issues.

occasional Failure to Extract/eject
Stiff bolt that forces you off target when cycling the bolt.
Issues with the bolt binding when running the bolt in/out. It happens when you fail to keep in/out pressure inline with the bolt body.

the KSS enhanced extractor has fixed my extraction issues and the extended bolt handle has helped with the bolt. I'm pretty happy with it but don't have much to compare it to. I only noticed the bolt binding when I was looking for the problem. It does bind if I try run the bolt at extreme angles but in normal use, I've never been a problem. If It ever became an issue Ill look into buying the larger bolt body for a tighter fit.

Everyone also agrees that accuracy is great and unless you're competing in PRS type matches those issues don't really matter.

Anyways, I plan on sticking with my 12LRP and would love to see videos of people using them (and other Savages) in PRS matches to motivate myself and get excited with what I'll be using.

Anyone have any links they can share. Maybe some pics of your PRS rifle. They don't usually say what rifle they're using in the PRS/NRL videos I've seen.

[Texas10]

If you've got the extraction issues fixed with the kit, what's left is working some magic on the bolt internals, primary extraction and hand-off timing. There are various sources for information on how to go about doing this yourself if your shop is reasonably well equipped, and there are some gunsmiths who can time and true your action for you. Otherwise, use the search function above and type in what you're interested in .

I prefer extended bolt handles, and have purchased a Savage Tactical bolt handle or two and it does help with bolt opening and extraction, as do the aftermarket handles, some of which are very nice to look at.

Refining the operation of the bolt internals as well as the primary extraction has, in my experienced, yielded the largest amount of improvement when it comes to cycling the bolt quickly and easily. Also be sure the magazine lips are not rubbing against the bolt head as it travels aft, and that the raceways are at least somewhat smooth. If you have a stainless steel action, this tends to be less of a problem.

A rear baffle/bolt handle primary extraction ramp that is a mis-match with the bolt lugs coming out of the abutments will cause all sorts of headaches, but is usually easy to resolve. If you've replaced the bolt handle, you will have changes this timing, so beware and be prepared to make some adjustments.

Others here will have some ideas to share also.

Good luck and good shooting!

[SoCal326]

Thanks Texas10. I'm not even sure the "stiff" bolt and binding will be an issue. But I know its a common complaint. I'll be paying more attention to it as I run it hard at the range next trip to see if it makes follow up shots or cycling slower. I think it feels pretty good at this point. I had a look at the raceway and it could probably use a good polishing. I'll get that done and see what that does.

I'd really like to see some videos of Savages in action at PRS/NRL events. Post em if you got em folks!

[LoneWolf]

Get on Youtube and watch the videos on the NRL by Conex Media.

[LoneWolf]

I will say I fought with all the issues you mentioned for about 6 months worth of shooting PRS matches in the beginning before I finally broke down and built a custom rifle. My scores instantly went up when I no longer had to fight to get the next round in the chamber. Like you my Savage rifles (I had built 6 at the time) had 0 accuracy issues, but the feeding, ejection, and extraction issues were rampant. So, if you come across a Savage action that runs, hold on to it! I've seen them out there, but they are few and far between in my observations since i started competing back in 2014. The tighter bolt body does help with the binding, but it also means less space for dirt and debris which means a little bit of sand and it's going to hang right up (I tried that too).

In the end I sold all my Savages to build and scope a custom rifle. I lost money on everyone of the rifles I had built and would have been money ahead had I just went to a custom in the beginning. I don't hate Savages by any means, but having the right tool for the job helped a lot. Don't dump a bunch of money into the LRP trying to get it to perform, focus on the shooting and when you're ready just go ahead and upgrade.

https://www.precisionrifleseries.com.../shooter/1832/

[want2ride]

My brother finally upgraded from his Savage LRP to a Defiance action after shooting the Savage for 4 years in PRS. He did really well in his local matches, but only middle of the pack at the Heatstroke. He figures the Defiance should net him an extra 10+ points from some of the small things and the speed of cycling.
He also started with a 260 then to 6.5x47 Lapua then to a 6.5 Creedmoor... now he is a 6.5 Creedmoor fan boy and his 3rd 6.5 Creedmoor barrel is going on his Defiance.

[want2ride]

My brother is in the background of a video of the 2017 Heatstroke open in Oklahoma. It is hard to tell, but he is carrying a Savage.

[kurusty]

Nice setup!

[Donnie]

I ran this Model 12 with GRS Sporter stock in my first ever PRS match last weekend. Only unbraked 308 in the match lol. I ordered a KRG 180 Alpha for the 2 day match in June. Ill be shooting this again in the April 27th Saprl match. It would be nice if they made actual 10rnd mags for savages!! I would have scored another 4-5 points if I had a proper 10rnd mag.

[JasonCO]

Local Colorado. 10FP, X-Caliber 6mm Creedmoor.

[SoCal326]

Local Colorado. 10FP, X-Caliber 6mm Creedmoor.

Nice, you run it in any matches yet? I guess if you're running 6mm Creedmoor than you probably are. At some point I need to get behind a chassis and see why everyone's been making the switch.

What rear bag are you using? I've got a couple of Midway USA bags that work great as rear squeeze bags but they are too full so they won't sit on a thin barricade without falling off. I'm looking at the SAP solo sack or the wiebad fortune cookie mini. Maybe even the Pint-Sized game changer but I like the $60 price of the other two.

[SoCal326]

...
I run:
M12 action, factory target model trigger, Shilen barrel, MPA chassis and brake, Warne base and rings, Athlon Ares ETR scope.

I'm blessed to have apprenticed under an awesome gunsmith back in the middle '90's, who shot 1K BR. So, he showed me a thing or two along the way. The below action was trued and the barrel spun up from a blank in my shop.

Nice setup. Its great to hear that someone with some know How is running Savage. I'm still running the HS precision traditional stock that came with my 12LRP along with the factory barrel. I've got some time before I need to start barrel shopping but It'll be fun to do the swap myself. I guess I'll see how I feel about everything when I get to that point--New rifle or new barrel.

I ran this Model 12 with GRS Sporter stock in my first ever PRS match last weekend. Only unbraked 308 in the match lol. I ordered a KRG 180 Alpha for the 2 day match in June. Ill be shooting this again in the April 27th Saprl match. It would be nice if they made actual 10rnd mags for savages!! I would have scored another 4-5 points if I had a proper 10rnd mag.

Ya, the "10 round" mags that hold 9 are pretty annoying. I wounder if they have a thinner follower that'll fix it. Maybe I can file it down a bit. ehh I'll probably wait for someone else to do it first. not sure I want to mess up my $90 mag yet. Do they run good for you?

I was at the range today and experienced a few failures to feed and tracked the issue down to an improperly seated magazine. It looks like I should be good if I insert and apply pressure on the rear of the magazine before clicking it in. The lip on the rear of the magazine just wedges itself in the magazine well and not go all the way in if you insert it wrong. It doesn't happen often but I should be able to correct the issue.

I'm at the point where if I can consistently seat my magazines correctly and can keep good even pressure when I'm running my extended bolt then the rifle should run great. Extraction issue was fixed with the aftermarket parts so Hopefully this covers most of the issues with Savages in PRS.

Have you experienced any of these issues?

[Donnie]

Nice setup. Its great to hear that someone with some know How is running Savage. I'm still running the HS precision traditional stock that came with my 12LRP along with the factory barrel. I've got some time before I need to start barrel shopping but It'll be fun to do the swap myself. I guess I'll see how I feel about everything when I get to that point--New rifle or new barrel. Ya, the "10 round" mags that hold 9 are pretty annoying. I wounder if they have a thinner follower that'll fix it. Maybe I can file it down a bit. ehh I'll probably wait for someone else to do it first. not sure I want to mess up my $90 mag yet. Do they run good for you?I was at the range today and experienced a few failures to feed and tracked the issue down to an improperly seated magazine. It looks like I should be good if I insert and apply pressure on the rear of the magazine before clicking it in. The lip on the rear of the magazine just wedges itself in the magazine well and not go all the way in if you insert it wrong. It doesn't happen often but I should be able to correct the issue.I'm at the point where if I can consistently seat my magazines correctly and can keep good even pressure when I'm running my extended bolt then the rifle should run great. Extraction issue was fixed with the aftermarket parts so Hopefully this covers most of the issues with Savages in PRS.Have you experienced any of these issues?

I have very few factory parts left on this gun. I think only the action, trigger and firing pin, and I guess bolt handle are factory. Everything else has been reworked and the action cycled over 30,000 times, so it's pretty smooth. I shimmed my bottom metal so the mags work well with 9 rounds anyway. I'll see if I have any issues at the cactus cup April 27 in Medicine hat. The 2 day in June I'll be switching to a KRG 180 Alpha chassis with 14 round mags!

[SoCal326]

Bump for more Savages in PRS? Lets see them.

[sniperjhk]

My Savage 10 TR .308






Sent from my iPhone using Tapatalk

[Donnie]

I cant get pictures working this morning, but here is the IG link for my finish in the Canadian Sharpshooter Classic. I took #1 in tactical division and placed #19 overall out of 103 shooters. This was a sanctioned PRS match at RFMA Academy near Hanna Alberta.
https://www.instagram.com/p/Bz7FGKDA2Vi/?igshid=2h127ur7nlbt
My rifle has changed configuration quite a bit since starting to shoot PRS matches!

[LoneWolf]

I cant get pictures working this morning, but here is the IG link for my finish in the Canadian Sharpshooter Classic. I took #1 in tactical division and placed #19 overall out of 103 shooters. This was a sanctioned PRS match at RFMA Academy near Hanna Alberta.
https://www.instagram.com/p/Bz7FGKDA2Vi/?igshid=2h127ur7nlbt
My rifle has changed configuration quite a bit since starting to shoot PRS matches!

Jon Pynch hurt some feelings up there!