Yes, you can pull the bolt to bore-sight the A-Series rifles.
As for the factory rail, just make sure the screws are properly torqued down before mounting the scope.
I get my A22 FV-SR next week, and I will be mounting the scope and sighting it in myself. I saw a video were a guy field stripped an A22. It appears to me from the video that by removing the recoil spring/guide rod assembly, the charging handle, and the bolt you can bore sight the A22 by looking through the barrel like you would with a bolt action rifle. Can anyone verify this for me?
I would also like to know if I need to do anything with the factory mounted pica tinny rail before I mount the scope. This is the first time I've done a scope myself,I bought the Wheeler combo mounting kit, and a CTK P3 rest and vise attachment. Any tips are welcome. Thanks
Just noticed the thread title is wrong, how do you edit it?
Last edited by Storis; 06-19-2019 at 08:15 PM. Reason: Thread title is wrong
Yes, you can pull the bolt to bore-sight the A-Series rifles.
As for the factory rail, just make sure the screws are properly torqued down before mounting the scope.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Bookmarks