Trying to figure out the thread sizes on studs 17,15,14 and 10.(parts #)
Thank you!
Trying to figure out the thread sizes on studs 17,15,14 and 10.(parts #)
Thank you!
Umm....might help if you include a link to whatever parts diagram you are referencing. Looking at the PDF owners manual on Savage's site #10 is the magazine, there is no #14 or #15, and #17 is the front sight.
https://cdn-savagearms2.azureedge.ne...2704962AF41A05
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Thanks for the link, I was using numrich. 19k action studs thread size is what I’m looking for.
The "stand offs" as they are more commonly referred to, have a male thread of 1/4-28, and a female thread of 12-32.
"As long as there's lead in the air....there's still hope.."
On my first MKII I drilled and tapped the 'stand offs' with a standard 1/4-28 thread so I could use a standard Allen head bolt in them. Try to find a stainless Allen head 12-32.
Bookmarks