7.62x39mm Savage Barrel

[fla9-40]

I have a hankering to build a 7.62x39mm and was wondering if anyone knows of a place to buy a barrel that would fit a Savage action?
Before you ask, the reason why is.....Just because!

[cconrad]

I have the same hankering. I'm thinking of using Apache Gun Works. I have a barrel on order with him now in another caliber.

[cconrad]

Oh yeah - Check with the site sponsors too

[Evlshnngns]

http://www.troupsystems.com/product/...orter-barrels/

I have the dies, would be great for subsonic. I emailed them a while ago, asking if it was .311 or .308, no response.

[ktmracer358]

http://www.troupsystems.com/product/...orter-barrels/

I have the dies, would be great for subsonic. I emailed them a while ago, asking if it was .311 or .308, no response.

I also emailed them on ther 300bo barrel I did end up getting a response but it was just on the Contour exactly of the barrel I emailed back a second time and haven't seen another response. Based upon the reviews on other forums for their other Barrel conversions their customer service is spotty at best

Sent from my SM-G960U using Tapatalk

[Newtosavage]

I have owned two Savage factory 7.62x39 barrels. Still have one in fact. They both have been super accurate, and so much fun.

[Steve390Gold]

http://www.troupsystems.com/product/...orter-barrels/

I have the dies, would be great for subsonic. I emailed them a while ago, asking if it was .311 or .308, no response.

Id bet dollars to donuts it is a 0.311", which is perfectly fine for shooting 0.308" pills. With the cheapest 7.62x39 barrel on my AR15 i could find was shooting 0.75moa all day long at 200 yards using 0.308 150gr nosler ballistic tips.

PacNor can make you any barrel you want.
XCaliber will too and is a touch cheaper than PacNors option

I also emailed them on ther 300bo barrel I did end up getting a response but it was just on the Contour exactly of the barrel I emailed back a second time and haven't seen another response. Based upon the reviews on other forums for their other Barrel conversions their customer service is spotty at best

Sent from my SM-G960U using Tapatalk

PacNors is top notch. Ive heard Xcaliber is goos too customer service wise.

[Newtosavage]

I'm going to put my Savage factory 20" 7.62x39 barrel, original bolt and magazine up for sale in the classifieds if anyone is still looking. Came off a model 10 scout and is very accurate.

[fla9-40]

I'm going to put my Savage factory 20" 7.62x39 barrel, original bolt and magazine up for sale in the classifieds if anyone is still looking. Came off a model 10 scout and is very accurate.

Newtosavage I tried to send you a PM but it says your box is full.....PM me about your barrel.

[Newtosavage]

Newtosavage I tried to send you a PM but it says your box is full.....PM me about your barrel.

Cleared it.

7.62x39 parts listed.

[fla9-40]

I'm still trying to find one if anyone knows of such a thing........

[futurerider103]

X-caliber barrels makes then that's what mine has

Sent from my SM-G960U using Tapatalk

[bsekf]

Do you have to change the bolt head? Or will a 473 work?

[futurerider103]

Do you have to change the bolt head? Or will a 473 work?

Should be fine. I used my 7mm-08(.473) and the SSS enhanced extractor and it works fine.

Sent from my SM-G960U using Tapatalk

[futurerider103]

Do you have to change the bolt head? Or will a 473 work?

Scroll to the end. This is my gun.

https://youtu.be/ZOGaHD7Beu8

Sent from my SM-G960U using Tapatalk

[futurerider103]

BTW I shot mine for the first time today and its amazing. Pull the trigger and do the x39. I posted a video in my build.

Sent from my SM-G960U using Tapatalk

[Newtosavage]

7.62x39 bolt actions are a ton of fun, and very deadly on deer and pigs inside 200 yards.

I had Shaw build me a 6.5 Grendel barrel a while back and it shot really well. Contour was too heavy so I sold it, but it was a very good barrel for the cost, I thought.