Results 1 to 12 of 12

Thread: How to prevent condensation from temperature change?

  1. #1
    Basic Member Nub Hippie's Avatar
    Join Date
    Jan 2018
    Location
    N.Y.
    Age
    35
    Posts
    99

    How to prevent condensation from temperature change?


    When coming inside from shooting on a cold day, what is the best way to prevent condensation from forming? I have read that a lot of people leave them in their cold case inside and let them gradually warm up and then take them out, others acted like they should be crucified for leaving their rifle in a case. I thought that was only bad for long term storage. Others use immediate heat such as radiator heaters, furnace vents, hair dryers, etc... To me warming it up slowly in its case then a light wipe down with oil and a oil patch down the barrel makes sense but I figured I'd see what people here do. Also, aquariums is another hobby of mine so even in the winter my house is usually around 45-50% humidity and 73-77 degrees F
    Rusty Shackelford

  2. #2
    Basic Member
    Join Date
    Dec 2006
    Posts
    3,355
    You can't prevent condensation in a case like that, just like you can't prevent it from raining......so you learn how to deal with the aftermath.
    "As long as there's lead in the air....there's still hope.."

  3. #3
    Team Savage
    Join Date
    Dec 2006
    Location
    125 miles North of San Francisco
    Age
    81
    Posts
    1,485
    WD 40 is crap for guns but it will drive out any moisture. Hose it down, wipe it off then apply a good gun oil.
    Pulled a rifle out of a "Cheep Skin" padded case and watched the moisture drip off the rifle. Pretty hard to believe BUT, WD 40 to the rescue. Same if you're hunting/shooting in wet weather. Hose it down!!
    Oz never gave nothing to the Tin Man, that he didn't already have.

  4. #4
    Team Savage Stumpkiller's Avatar
    Join Date
    Jan 2018
    Location
    Port Crane, NY
    Age
    64
    Posts
    979
    Gradual warming is about the only way. Or just leave the gun out in the cold if it will be used the next day.
    "They couldn't hit an elephant at this distance." Last words of Gen. Sedgwik

  5. #5
    Basic Member
    Join Date
    Mar 2017
    Location
    Central Arizona
    Posts
    441
    Quote Originally Posted by Nor Cal Mikie View Post
    WD 40 is crap for guns but it will drive out any moisture. Hose it down, wipe it off then apply a good gun oil.
    Pulled a rifle out of a "Cheep Skin" padded case and watched the moisture drip off the rifle. Pretty hard to believe BUT, WD 40 to the rescue. Same if you're hunting/shooting in wet weather. Hose it down!!
    Try WD40 Specialist. It gives better corrosion protection than any "Gun Oil" on the market. Break down the barreled action from the stock before the season and treat the metal and you won't have to worry about it much during the season.

  6. #6
    Basic Member big honkin jeep's Avatar
    Join Date
    Mar 2007
    Location
    Metro Atlanta Georgia.
    Posts
    2,546
    I know you guys are talking about the surface metal only, and I know WD40 stands for water displacement 40th formula
    But after the headaches that the left over crud gum and varnish from that product have caused me,
    If I catch someone within 100 yards of one of my firearms with a can of WD40.....
    A good wife and a steady job has ruined many a great hunter.

  7. #7
    Team Savage
    Join Date
    Dec 2006
    Location
    125 miles North of San Francisco
    Age
    81
    Posts
    1,485
    That's why I said "hose it down, wipe it off" then get after it with a good gun oil. Seems that ATF (Automotive Transmission Fluid) is just about the best thing for keeping rust away. Cheap too compared to some of the Specialty Gun Oils. Won't dry and gum up over time either, like WD.
    Oz never gave nothing to the Tin Man, that he didn't already have.

  8. #8
    Team Savage Stumpkiller's Avatar
    Join Date
    Jan 2018
    Location
    Port Crane, NY
    Age
    64
    Posts
    979
    I've had great luck with CLP Breakfree and Beechwood-Casey Barricade - including several flintlocks I hunt with in the wet fall and winter.
    "They couldn't hit an elephant at this distance." Last words of Gen. Sedgwik

  9. #9
    Basic Member BB68's Avatar
    Join Date
    Nov 2017
    Location
    iowa
    Age
    45
    Posts
    257
    I try to get as much "air" on them as possible. Helps evaporate condensation as fast as it happens.

  10. #10
    Basic Member
    Join Date
    Mar 2017
    Location
    Central Arizona
    Posts
    441
    Well here is a test comparison that was a few years ago.

    http://www.dayattherange.com/?page_id=3667

  11. #11
    Basic Member farmer44mag's Avatar
    Join Date
    Nov 2011
    Posts
    89
    Quote Originally Posted by sharpshooter View Post
    You can't prevent condensation in a case like that, just like you can't prevent it from raining......so you learn how to deal with the aftermath.

    Ive had good luck keeping them in hard cases to warm up slowly. The cheap ones with grey foam padding. As long as it’s not extreme cold. It’s usually above zero when I hunt or shoot.
    Axis .223 with 4x12x40 Redfield Revolution
    Stainless Axis .30-06 with 3.5x10x40 VX3 Leupold.

  12. #12
    Basic Member
    Join Date
    Jun 2013
    Posts
    2,879
    Just shot a match a few weekends ago that it rained the entire weekend. Got back to the room, took my action out of the stock, wiped everything down with rem-oil wipes then dried it off with a towel. put it back together and Re-lubed/greased everything like I do as normal maintenance and set it aside for day 2 of the match.

    Just wipe it off and don't leave it wet. If you're going to store it after it building up condensation run a patch down the barrel followed by a couple dry patches.

Similar Threads

  1. How to prevent case head separation
    By Idaho in forum Ammunition & Reloading
    Replies: 25
    Last Post: 11-04-2016, 01:34 PM
  2. Effects of Temperature on Ammo
    By SteelerNation in forum Ammunition & Reloading
    Replies: 15
    Last Post: 02-07-2015, 10:17 PM
  3. Annealing temperature
    By gotcha in forum Ammunition & Reloading
    Replies: 28
    Last Post: 03-13-2012, 01:07 AM
  4. Temperature Stability
    By cowboyarcher in forum Ammunition & Reloading
    Replies: 4
    Last Post: 01-06-2011, 07:03 PM
  5. Condensation
    By possum1 in forum Ammunition & Reloading
    Replies: 6
    Last Post: 08-02-2010, 05:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •