So I usually use a bedding kit or JB Weld no problems I have done several
with the J B weld I use car wax for release agent
well Home Depot was out of J B Weld so I bought gorilla glue two part epoxy
put car wax all over the metal
mixed epoxy bedded action waited the 10 minute set up time pulled it apart
oh wait just kidding could not pull it apparat tried and tried
made a punch out of a wood dowel no good used a brass punch no good
finally I decided that I would split the stock off ( wood stock ) so I got a wedge and proceeded to drive the wedge between the barrel and stock all of a sudden pop it popped apart now the real problem the epoxy remained on the metal and did not stick to would
took hours to clean up action now I need to get it blued