Any decent gunsmith with a lathe should be able to handle that. If you add your location to your profile it would also let people know where you are and they might be able to recommend someone in your area.
Just thought i would post this in this section. I have a friend who wants to cut a 24"6.5 creedmoor barrel, to 16 1/2 inches, thread the muzzle and recrown it, and make a thread protector for. My small lathe has too small a tailstock to do it. Can anyone steer me to a vendor who can do this, in a timley manner, or any vendors feel free to chime in.
Any decent gunsmith with a lathe should be able to handle that. If you add your location to your profile it would also let people know where you are and they might be able to recommend someone in your area.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Check out class 3 machining out of Texas. Fast turnaround and very competitive pricing
Well played, you magnificent bastidge!!
I'm a firm believer in the theory that if it bleeds, I can kill it.
Bookmarks