I’d like to ask for help please regarding the pictured recoil lug. I purchased this as a “used aftermarket recoil lug” that I plan on using on a non-Accu Trigger receiver/non-Accu Stock. I’m in the parts gathering phase and have not received my action yet. In the past I have used NSS trued recoil lugs which have had locator pins installed. I’ve done a little bit of searching on this site and have seen that, “by trial and error”, recoil lugs without locator pins can work. First question, does this lug look like it would work on a non-Accu trigger receiver/non-Accu Stock? 2nd question does the hole appear to be in the right location; because if it does I could have a friend tap the hole and install an appropriate sized Allen head screw which could serve as a locator pin. Thanks in advance for your help.