Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: Cannot figure out what scope ring height I need

  1. #1
    New Member
    Join Date
    Dec 2016
    Posts
    8

    Cannot figure out what scope ring height I need

    I'm new to bolt actions and I have a Savage FCP-SR in 308. I've been wanting one of these for probably 3 years now and one fell in my lap unfired for an outstanding price! It is the later version I believe with the solid scope rail. The scope I plan to get is the Primary Arms 3-18x50 which according to PA has a 60mm objective diameter with scope cap. I want to really make this rifle nice and special to me so I do not plan to cut any corners cost wise (within reason). I'd like to go with some Seekins rings but cannot figure out what size I would need. Other than that I think the bipod will be a nice Atlas PSR. Right now I just have the rifle but I'm very eager to start ringing steel out past 100 yards.



  2. #2
    Team Savage
    Join Date
    Sep 2013
    Location
    Decatur, AL
    Age
    47
    Posts
    304
    Low rings will probably work. My 50mm scopes clear with low rings mounted on Warne rails. I use Warne and Leupold rings. Google "Seekins 30mm 50mm scope" and you can find some pictures of 50mm scopes using Seekins low rings. Looked like plenty of clearance to me.

  3. #3

  4. #4
    Basic Member
    Join Date
    Feb 2018
    Posts
    63
    Are you going to replace the rail? I don't know which rail Savage puts on those rifles. I'd get a higher quality rail to go with the Seekins rings.

  5. #5
    New Member
    Join Date
    Dec 2016
    Posts
    8
    Quote Originally Posted by Apollo117 View Post
    Are you going to replace the rail? I don't know which rail Savage puts on those rifles. I'd get a higher quality rail to go with the Seekins rings.
    Yea I probably will. What would be a good option? Not too worried about cost

  6. #6
    Team Savage
    Join Date
    Sep 2013
    Location
    Decatur, AL
    Age
    47
    Posts
    304
    Quote Originally Posted by Stopsign32v View Post
    Yea I probably will. What would be a good option? Not too worried about cost
    I like the STEEL Warne bases myself. That's what I use on all mine. But, others will have their preferences, so be prepared for several different answers.

  7. #7
    New Member
    Join Date
    Dec 2016
    Posts
    8
    Is the factory base really not that good? I'll only be doing 400 yards MAX.

  8. #8
    Basic Member
    Join Date
    Feb 2018
    Posts
    63
    Warne makes a steel rail. I'm sure some other companies make steel rails too.

  9. #9
    Basic Member
    Join Date
    Feb 2018
    Posts
    63
    Quote Originally Posted by Stopsign32v View Post
    Is the factory base really not that good? I'll only be doing 400 yards MAX.
    I'm not sure if the factory base is aluminum or steel. My guess is aluminum. I'm not a fan of aluminum. I prefer steel.

    I do use some aluminum rails and rings. The aluminum rails and rings I use are all made of alloys 7050 or 7075 as these are stronger than the 6061 alloy used in most aluminum rails and rings.

  10. #10
    New Member
    Join Date
    Dec 2016
    Posts
    8
    The Seekins rings are aluminum. I always thought keep steel with steel and aluminum with aluminum?

  11. #11
    Team Savage
    Join Date
    Sep 2013
    Location
    Decatur, AL
    Age
    47
    Posts
    304
    Quote Originally Posted by Stopsign32v View Post
    The Seekins rings are aluminum. I always thought keep steel with steel and aluminum with aluminum?
    I'm not sure how much it matters. I use steel bases and rings exclusively. Warne and Leupold have been my go-to brands.

  12. #12
    New Member
    Join Date
    Dec 2016
    Posts
    8
    I know most everyone goes with the 20 MOA right? I don't understand the "F-class" and ejection ports.

    Does anyone know what base I'd need off this list? http://www.egwguns.com/hd-savage/


  13. #13
    Team Savage
    Join Date
    Sep 2013
    Location
    Decatur, AL
    Age
    47
    Posts
    304
    It won't hurt to go with a 20 MOA rail. Gives you a bit more elevation correction if you were to ever shoot at really extreme distances.

    Your rail should be for a Savage 10-16 round rear short action with 6-48 screws.

    http://www.egwguns.com/hd-savage-rou...-short-action/

  14. #14
    New Member
    Join Date
    Jan 2019
    Posts
    10
    as to "which" scope rings, always been kind of a trial by error.

    I've always set them up so I have two pieces of a matchbook cover thickness between the front bell and the action/barrel. The idea is to keep the center line between the bore and the scope as close as possible.

    give yourself enough room to clear the scope, any covers you add and the barrel.

    Depends on base height and brand of rings to get it right.

  15. #15
    New Member
    Join Date
    Dec 2016
    Posts
    8
    Someone correct me if I'm wrong here but I plan to go with the Primary Arms 3-18x50 ACSS HUD reticle. This scope you are suppose to zero in at 100 yard and then leave it alone.

    Wouldn't I be fine going with a 0moa rail in this situation?

Page 1 of 2 12 LastLast

Similar Threads

  1. Scope ring height?
    By 70oldsracer in forum Optics
    Replies: 22
    Last Post: 03-18-2018, 09:08 AM
  2. savage 10 fcp-sr Scope ring height
    By pah696969 in forum 110-Series Bolt-Action Rifles
    Replies: 4
    Last Post: 06-28-2017, 08:51 PM
  3. Savage 16 scope ring height
    By boggintuff in forum Optics
    Replies: 0
    Last Post: 01-02-2013, 07:45 PM
  4. Scope Ring Height?
    By haussanator in forum Optics
    Replies: 4
    Last Post: 08-17-2011, 07:52 AM
  5. scope ring height for my leupold
    By ford97 in forum Optics
    Replies: 1
    Last Post: 12-10-2009, 09:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •