Reply With QuoteI take it that you've never had it out of the stock? To remove the trigger assembly, you simply pull one pin, the front one.....literally with your fingers.
Greetings all!
I am finally getting around to sending my actio off to have the barrel threaded. I have the Axis II with the 22” bull. I am going to have the barrel cut to 16”. I have asked the machine shop if they can cut with the trigger assembly in or if it needs to be removed.
Any videos or tutorials on how to disassemble the trigger assembly?
Thanks
I take it that you've never had it out of the stock? To remove the trigger assembly, you simply pull one pin, the front one.....literally with your fingers.
"As long as there's lead in the air....there's still hope.."
It's pretty simple, just remember how to put it back together
Sent from my SM-J327VPP using Tapatalk
My crystal ball tells me this same poster will be back for help on assembly. My Crystal ball says he will get plenty of help on youtube.
The Dunning-Kruger effect is alive and well.
Posting Permissions
Bookmarks