Hi all,

Just got a new 10 GRS model, and after some initial 100 shoots, I've noticed some scratches in all types of Brass I'm using, from factory ammo to hand loads. Also, when the rifle gets hot, it is really hard to chamber a new cartridge.

I could not test the accuracy yet, since I found out that the rail came lose after some shots, I had to remove the bolts, clean them and use thread locker.

I inspected the chamber an found some marks inside, that are compatible with the scratches I see in the brass. The scratches in the brass are deep enough so you can fell them with your nail, I have 2 other Savages and never had this issue before.

I spoke to Savage and they told me to send the rifle to them, but I have to pay the shipping. UPS charges about 200 with proper insurance. I'm kind of disappointed that I have to pay for something that seems to be a manufacturing issue.

Any ideas?

Attached are the pictures from the barrel and brass.