Early model 110 with metal follower and flat metal mag cover. Can I use a blind magazine stock. If so what parts do I need.
Yes. You don't need anything more than what you already have. Just get a long action blind mag stock and use the internal mag box, spring and follower, action and new blind mag stock. The new stock will be closed on the bottom, so there is no need for the metal piece currently covering the hole in the bottom of the stock.
Thanks
How early of a gun are we talking? If it's a pre 1966 rifle and you try to put a post 1966 stock on it your trigger won't stick through as far as it should to be usable. The earlier guns had a shorter (top to bottom) trigger assembly than the 1966 and up.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Definitely pre 1966 ser#16xxx
You will need an OEM stock from the same era as everything aftermarket is for the 1966+. Not sure if it's possible or not, but you might be able to swap out the original trigger with a later style or an aftermarket one. I'm sure someone will chime in to verify or dispel the compatibility.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Posting Permissions
Reply With Quote
Bookmarks