Results 1 to 4 of 4

Thread: Looking for Data for Barnes Polymer Tipped 130 Gr TSX for 308 and 30-06

  1. #1
    New Member
    Join Date
    Jan 2008
    Location
    Brighton, MI
    Posts
    24

    Looking for Data for Barnes Polymer Tipped 130 Gr TSX for 308 and 30-06


    Hi all! One of the few reloading manuals I do not possess is the Barnes. I am looking for some load data for their 130 grain 30 cal Polymer TSX bullet for 308 win and 30-06. I have two ladies hunting with me this year and I would like to set them both up with some mild recoiling loads. My daughter will be using a 10 BVSS-S in 308 Win. I have installed a 20" shortened stainless fluted barrel on it and dropped it into a youth stock. My son used it with full power 150 grain Noslers for 3 years with no issues but my daughter is a little more recoil sensitive. I would like to assemble some 130 grain loads in the 2600-2700 FPS range for the 308 and some 2800-2900 fps loads for the 30-06 for my wife. That should put the recoil on par with a 270 or slightly less in the '06 and she does not have any issues shooting a 270 with full power 150 grain bullets out of the ported barrel. The '06 started life as a 116 Alaskan in 270 but the factory ported barrel just created way too much muzzle blast. Anybody have any data they could share out of the Barnes book or some loads with this bullet you have found to work well in your own rifles? I have just about every rifle powder that exists from Alliant, Accurate, IMR, Winchester and Hodgdon as well as primers from all major manufacturers and then some. Thanks for your help!

    Jeff
    Calling an illegal alien an undocumented immigrant is like calling a crack dealer an unlicensed pharmacist.

  2. #2
    Team Savage
    Join Date
    Feb 2007
    Location
    Georgia
    Posts
    1,534

    Re: Looking for Data for Barnes Polymer Tipped 130 Gr TSX for 308 and 30-06

    I have done exactly what you are looking for. 130 gr TTSX in 308 and 30-06 reduced loads over H4895.

    Let me look over my notes and I will get back to you.

    Also you can find load data on the Barnes site.

  3. #3
    Team Savage
    Join Date
    Feb 2007
    Location
    Georgia
    Posts
    1,534

    Re: Looking for Data for Barnes Polymer Tipped 130 Gr TSX for 308 and 30-06

    30-06 reduced load with 130 gr TTSX.
    Fired in a Remington 24" barrel.
    3.17 col 92% fill 43K
    49 gr H4895, chronoed at 2750

    I loaded some reduced loads for 308 but dont have any chrono data
    Only QL data.
    22" barrel
    2.8 col 96% fill 40K
    42 gr should return about 2650 FPS

    Also have some reduced 110 gr Vmax loads with chrono data if you are interested.


  4. #4
    New Member
    Join Date
    Jan 2008
    Location
    Brighton, MI
    Posts
    24

    Re: Looking for Data for Barnes Polymer Tipped 130 Gr TSX for 308 and 30-06

    Hey! Thanks a lot for the data. I really appreciate it. I did take a look at the Barnes site but they really had a limited amount of info for that bullet and nothing as slow as what I wanted.

    Jeff
    Calling an illegal alien an undocumented immigrant is like calling a crack dealer an unlicensed pharmacist.

Similar Threads

  1. MDT 223 polymer 10rd size?
    By snowgetter1 in forum Off-Topic
    Replies: 3
    Last Post: 01-07-2016, 07:24 PM
  2. Polymer Ammo
    By 308Gunsmith in forum Off-Topic
    Replies: 5
    Last Post: 12-05-2013, 07:23 PM
  3. 22-250 Barnes Varmint Grenade load data
    By AndyD in forum Ammunition & Reloading
    Replies: 6
    Last Post: 08-08-2013, 08:16 PM
  4. Barnes Tipped TSX 30-06 150 gr hunting load.
    By Nandy in forum Ammunition & Reloading
    Replies: 4
    Last Post: 07-01-2013, 11:46 AM
  5. Anyone used 80 gr Barnes 243 Tipped TSX bullets on Hogs
    By TechHunter in forum Predator and Varmint Hunting
    Replies: 13
    Last Post: 11-04-2009, 01:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •