So I finally finished this thing. Only took me 10 years.
Dual port target action
Mcgowen 338 edge, 30"
Boyd's pro varmit stock
Nikon black fx1000
Seekins rings
Homemade cheek riser hardware and bolt knob
The standard trigger guard is screwed to the stock only. The stock is a blind mag, so I milled out the rest of the stock from the recoil lug back to the sear. This allowed me to fill the stock with a 3 screw aluminum bedding block. I then cross pinned the block to the stock. The action was then bedded.