Page 2 of 2 FirstFirst 12
Results 26 to 29 of 29

Thread: eabco accuracy barrel in .243 1:8 load data requested

  1. #26
    New Member
    Join Date
    Sep 2013
    Location
    Virginia
    Posts
    8

    Im running a Bartlien 26" barrel 1-8, My favorite load for PRS is 46gr RL26, 105 BTHP hornady, .020 off lands, rings steel consistently out to 1200 yds and is sub MOA everywhere inbetween. 100yd groups avg.2-.3 all day
    3108 fps. Not a hot load, no pressure signs at all. Just really hard to keep up with availability of RL26 !!!!H1000 is my second favorite.

  2. #27
    Basic Member
    Join Date
    Oct 2015
    Location
    North Carolina
    Age
    56
    Posts
    443
    What's your H1000 load?

  3. #28
    New Member
    Join Date
    Sep 2013
    Location
    Virginia
    Posts
    8
    44.8gr H1000 for 2830 fps

  4. #29
    Basic Member
    Join Date
    May 2016
    Age
    47
    Posts
    118
    Quote Originally Posted by DogT View Post
    I was thinking about getting an ebcco but 2 problems, they don't make 220 Swift for my 112J and I read on some forum that they don't lap their barrels during the finishing and have seen some with issues about the fouling. So I'll pass. Just my 2 cents.
    Easy enough to lap the barrel yourself however I do agree that a high quality manufacturer should be doing it at the factory. It should be lapped after the chamber has been cut. Then you get even wear across all exposed/leading edges. Essentially eliminating any need for a “break in”

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Accuracy Barrel Kit by EABCO
    By bsekf in forum 110-Series Rifles
    Replies: 14
    Last Post: 05-27-2017, 10:59 AM
  2. Savage Accuracy Barrel Kits by EABCO
    By fla9-40 in forum 110-Series Rifles
    Replies: 14
    Last Post: 06-16-2016, 05:54 PM
  3. Eabco accuracy barrel review
    By DanSavage in forum 110-Series Rifles
    Replies: 28
    Last Post: 09-09-2015, 02:36 PM
  4. EABCO Accuracy barrels
    By Slick in forum 110-Series Rifles
    Replies: 6
    Last Post: 07-24-2012, 06:23 PM
  5. Any one using a criterion barrel in 308...load data please
    By mike82352 in forum Ammunition & Reloading
    Replies: 11
    Last Post: 02-21-2012, 11:47 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •