Hey guys I just put together a model 10 in 6mmbr. It is in a mdt lss chassis. I am running an aics mag. It picks up and feeds fine from the mag. My issue is extracting the fired casing. The bolt pulls the casing back about to where the shoulder reaches the ejection port. Then it drops the casing. Loaded mag empty mag no mag. It's always the same spot. I round out of 50 came all the way back and ejected. I have never built a bolt gun with a casing this short before. What do you guys recommend I try and do to resolve this issue. Plucking a casing out with my fingers isn't always the easiest. I'd appreciate any info.
Thanks,
Adam