Results 1 to 5 of 5

Thread: Help with putting Accutrigger back into model 11

  1. #1
    New Member
    Join Date
    Jun 2018
    Posts
    2

    Help with putting Accutrigger back into model 11


    I have seen lots of stuff on line but no help with reinstalling the accutrigger back into a model 11 in 7mm-08 with the bolt release on the bottom by the trigger guard. K526 are the first letters to the serial. The problem is how to fit the small sear spring back into the trigger assembly to work. There appear to be many versions but this one one has a spring with a small strainght arm and the other is longer with a slight bend in the end of the longer arm.

    Anyone have some suggestions or pictures or diagrams on how to do t his and exactly where the long arm attaches?

    Thanks, Jim

  2. #2
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    South Texas
    Age
    66
    Posts
    7,784
    Jim, There is a counter bore on the side of the action where the sear/hanger pin goes through. The coil part of the spring goes in there. In this picture you can just see the end of one of the springs legs where most of the spring is hidden by the sear and the hanger.

  3. #3
    New Member
    Join Date
    Jun 2018
    Posts
    2
    Thanks,

    I looked at ?? utubes on install and remove the trigger and not one could show the spring set up.

    Is there a trick to getting the piece in place with the spring pressure?

  4. #4
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    South Texas
    Age
    66
    Posts
    7,784
    Quote Originally Posted by JimD View Post
    Thanks, Is there a trick to getting the piece in place with the spring pressure?
    Manual dexterity......






    0

  5. #5
    Basic Member short round's Avatar
    Join Date
    Jun 2011
    Location
    Georgetown, ohio
    Age
    77
    Posts
    562
    Trick. Use a punch or something about the size of the pin, to align everything. Insert pin pushing out alignment tool.

Similar Threads

  1. Replies: 9
    Last Post: 08-28-2015, 02:42 PM
  2. Accutrigger to older flat back ?
    By tammons in forum 110-Series Rifles
    Replies: 2
    Last Post: 02-18-2014, 04:59 PM
  3. Rimfire: Putting peep sights on a model 4M
    By Axxxel in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 1
    Last Post: 08-05-2013, 11:26 AM
  4. Question about putting an AccuStock back on
    By justeric in forum 110-Series Rifles
    Replies: 2
    Last Post: 08-27-2010, 12:40 AM
  5. Stevens 200 SA putting in a Savage 110 stock?
    By pchunterpa in forum 110-Series Rifles
    Replies: 8
    Last Post: 03-08-2010, 01:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •