That looks GOOD! I plan to do the same, it's pretty tough stuff.
I finally had my stock auto cleared. I found a guy that has done a few in the past, and I am happy with the way it turned out. I have posted, several posts down below,when I polished the stainless out this past winter with the stock dyed orange.
So, here is the finished rifle below. It looks better in person for sure.
That looks GOOD! I plan to do the same, it's pretty tough stuff.
Looks great, but a little too glossy for my tastes.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Hope it shoots as good as it looks!
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
Looks great!
Somebodyisworkingonthreadcount.
The Dunning-Kruger effect is alive and well.
Looks good from here.
(Jim: If you don't care for the "shine", you can add a satin to the spray mix.)
My first go around with Automotive Clear Coat was on a Laminated stock for my XP 100 converted rifle in .221 Fireball.
It WAS finished with Beachwood Casey True Oil. Needed something else/different so I sanded it down to raw wood. Dropped it off at our Body Shop and told them to shoot it the next time they were shooting a Clear Coat finish. Couple of days later it was finished. Probably 5 coats of clear? Pretty thick. That finish brought out colors I didn't know existed in that laminated stock. Deep rich colors and finish. That sold me.The under coat of Beachwood Casey True Oil acted as a filler.
All of my stocks get a clear coat finish now. Small jobs with a sprayed on Poly coat but the big jobs get Automotive Clear. Tough as nails.
You need to be set up to shoot Automotive Clear. In a body shop, hang the stock on a nail and while you're shooting the car, turn around and shoot the stock a time or two. Pretty easy that way. Bad stuff if you don't take the proper precautions. Known to make your babies be born naked!!
Oz never gave nothing to the Tin Man, that he didn't already have.
The resulting fingerprints would drive my OCD into overtime...but looks great when clean!
Very true. I spray, I know. If you really want the best protection, use polyurethane clear vs typical body shop urethane. Either will crack if impacted, especially if there are multiple coats. I like that kind of gloss on cars and trucks, not my rifles, but, to each their own and whatever makes you happy.
Looks nice
A good wife and a steady job has ruined many a great hunter.
Bookmarks