No enough information so here is what I have. As long as the action screw spacing is the same. Some model 12's like the PTA have a different screw spacing and there is always the stagger-feed/ center-feed issue.
I have a model 12 large shank 300wsm in a Bell and Carlson stock. Can I use that stock for a small shank 6mm Creedmore build that is coming together now?
No enough information so here is what I have. As long as the action screw spacing is the same. Some model 12's like the PTA have a different screw spacing and there is always the stagger-feed/ center-feed issue.
Both actions are 1.350 +or - Major Diameter for what that's worth
Bookmarks