Need some advice. I'd like to have a larger diameter bolt body fitted and the action trued and timed. Right now she has some bolt binding during ejection. Primary extraction is excellent, no issues there, but pulling the bolt back she sometimes binds right at the start. It seems that the bolt body is too small. Not 98 Mauser loose, but loose enough to cant and bind up.
The bolt baffle doesn't have the guide rib so it can bind on the receiver bridge. Figure a bevel on both would correct it.
I hear the bolt body can be a diy, but it can mess up primary extraction if done wrong. Rather have someone experienced tackle it. The t&t might be not exactly necessary, but it wouldn't hurt. She's a good rifle, but a little spiff would be nice. Recommendations appreciated.