Got an e-mail from Pac Nor today. My new 22 Creedmoor barrel shipped! In the mean time I got to looking at questions concerning the floating of the tang. So, regardless of the model the tang should not be touching? This is the stock I got https://www.stockysstocks.com/stock-...2998-2999.html. So, I mounted the action and tightened the front 2 screws up. The 3rd screw is only on there with hardly any torque to speak off. In my mind I tightened it enough so it wouldn't go missing. At this point the tang is touching the stock. I tried to slip some paper between it and the stock, no go. So, do I need to get the Dremel to working or what? This is my first Savage.