cant be right friend is lookin for trouble

[legion]

i have a buddy who tells me he seats his 6.5 creed bullets using a 6.5x55 swede seat die
he says he unscrews it so the shoulder isnt contacted and he just adjusts the die seat stem to set the bullet
he uses 6.5 creed appropriate shell holder
is he out of his mind or is this ok
his excuse is he cant find creed dies in kenora

[Robinhood]

Seems like the swede die would be too long affecting case alignment potentially causing bullet RO, but if the bolt will close and the powder is right, why not? He could use a mallet also. How about this, can they get mail in northern Ontario? If so why not order one?

[legion]

agreed i think hes just a cheap mofo
maybe he will learn a hard lesson
ty

[want2ride]

Hi from across the lake!
If it works.... good for him. I have only been reloading for a couple years now and I am not an expert, but it seems like that is asking for some type of trouble.

[Evlshnngns]

Hornady "custom grade" dies are by caliber. It has a moving sleeve that fits around the case neck early in the up stroke, and aligns the case to the seating stem. It works on my swede and the creed. I don't have a runout gauge to say how well it works.

[pisgah]

If he's backing the die out until only the seating function is taking place, he's not risking anything, really, beyond a bit of bullet runout of he's careless.

[legion]

yes he has lee dies and he unscrews enough that only the seat function works

[charlie b]

The Lee dies also have the 'floating' seat so should work fine. They only contact the case neck enough to align the bullet and case.

Sent from my SM-P580 using Tapatalk