I've been looking at bottom metal for my model 10 and came across this from a different forum. This specifically deals with an Accurate Mag bottom metal replacement, not the new Savage metal in you 110 T-D, but it's worth at least trying and see if it helps.
A Magpul AICS pmag work but they need to be modified.
Towards the front of the Pmag feedlips there is a slope down, it needs to be more of a 90 angle. With out dremeling some plastic away it will interfere with the internal machining of the dbm preventing the mag from seating. It was seriously just 5 min of wearing the angle down enough to seat the mag.
https://www.ar15.com/forums/Precisio...Update/3-7055/
*If linking a different forum is not allowed a mod can please remove or let me know and I will.
And if it doesn't work I'd try any AICS mag, such as AI, Accurate Mag, MDT, etc. I believe MDT also carries polymer mags if you'd like to say with that instead of metal ones. Good luck.
Bookmarks