Brand new reloader and have some issues with my Savage Model 10 fcp-k in 223. I found my distance to the lands with my bolt action 223 last night and plan to start 20 hundredths off for velocity testing. I found my oal to be 2.254 using sierra 69 HPBT (this is already UNDER the 2.26 minimum for that bullet). Using my Redding competition seater die, I dialed 20 hundredths off and hit the right COAL of 2.234. When using my forster ogive tool though, the distance measured is only 9 thousandths off! I started with a coal of 2.254 and 1.857 for ogive and now I get 2.234 coal and 1.848 for datum. I brought the ogive back 20 hundredths, but then my COAL was 30 hundredths below minimum! What am I doing wrong here. Is my throat really that short. I have always had issues feeding with heavier factory bullets so maybe this is related. Can I be that far below minimum and try the loads?