Which trigger do I have?

[Midmosavage]

I just bought a used model 11 for doing a build on and was going to adjust the trigger on it or get an aftermarket one depending on which trigger it had. After taking the action assembly out of the stock it has a different trigger than on any of my other model 10's. I looked up the serial number on the action and it comes up as a 2011 model which I would think should have an accutrigger. After searching around on the net it looks exactly like a trigger from a savage axis. Is that possible? And if it is an axis trigger would I be better off trying to do the axis trigger spring modification or replacing the trigger? Which timney trigger would I get to replace it? One for savage 10 or one for savge axis? I'll try posting a picture. Any help would greatly be appreciated.

[RP12]

Pictures would really help.

[Midmosavage]

[IMG][/IMG]

[Midmosavage]

Hopefully that picture works and you can see it

[Robinhood]

This is the latest version non Accutrigger. It came into existence around the time they transitioned to the Accutrigger but was found on the less expensive models. It replaced the marginally adjustable straight wire spring trigger.

[Midmosavage]

Ok. Thank you. That makes sense now. Guess I'll be ordering a RB Sav-1 for it.