Results 1 to 10 of 10

Thread: Ejector Worn on New Rifle ?

  1. #1
    Basic Member
    Join Date
    Jan 2013
    Location
    N. Idaho
    Posts
    47

    Ejector Worn on New Rifle ?

    I was cleaning my Model 12 6.5 cm bolt today and I noticed the ejector wasn't round. It looked like half of it's diameter is missing . It tapers back sharply towards the bolt face. I checked my other Model 12 and the ejector is round. It doesn't look broke, it looks worn. This rifle has less than 100 rounds through it.

    Has anybody else seen this?
    Is Savage the best option for buying one ?

    Thanks

  2. #2
    Team Savage RustyShackle's Avatar
    Join Date
    Apr 2016
    Location
    N.Ida
    Posts
    653
    It’s designed that way.

  3. #3
    Basic Member
    Join Date
    Apr 2014
    Location
    Texas
    Age
    61
    Posts
    4,233
    This post needs pictures.

  4. #4
    Basic Member
    Join Date
    Jan 2013
    Location
    N. Idaho
    Posts
    47
    This is what it should look like, but instead it looks like it broke off or wore off on a diagonal from the end to the cut out for the retaining pin. I'm going to have to buy a punch small enough to knock the pin out and remove it

    tools-accessories/rifle-parts/bolt-parts/ejector-parts/ejectors/ejector-prod12814.aspx

  5. #5
    Team Savage RustyShackle's Avatar
    Join Date
    Apr 2016
    Location
    N.Ida
    Posts
    653
    I can’t find the thread, however I’m working on finding a picture for you. I’m pretty sure you’re describing the standard angled ejector.

  6. #6

  7. #7
    Basic Member
    Join Date
    Jan 2013
    Location
    N. Idaho
    Posts
    47
    Thanks . I guess they changed the design. My other Model 12 has the round ejector, and it's only a year older.

  8. #8
    Team Savage
    Join Date
    Dec 2006
    Posts
    2,708
    That style ejector is for a specific set up. You can find them in rifles that use an A.I. magazine.
    "As long as there's lead in the air....there's still hope.."

  9. #9
    Basic Member
    Join Date
    Jan 2013
    Location
    N. Idaho
    Posts
    47
    Interesting that they put one in one of my model 12's and not the other......

  10. #10
    Team Savage Zero333's Avatar
    Join Date
    May 2016
    Location
    ON, Canada
    Posts
    786
    I have Savages with both type of ejectors... tapered and regular round,... and there is not difference in performance.

Similar Threads

  1. accutriggeredge worn
    By chetc in forum 110-Series Bolt-Action Rifles
    Replies: 8
    Last Post: 06-02-2018, 08:05 AM
  2. Is my brass worn out or did I screw up my necks?
    By Tarleton_Texan in forum Ammunition & Reloading
    Replies: 12
    Last Post: 03-13-2012, 07:36 AM
  3. worn cocking pin
    By zap in forum 110-Series Bolt-Action Rifles
    Replies: 6
    Last Post: 02-29-2012, 02:18 PM
  4. Ejector pin
    By twarren in forum 110-Series Bolt-Action Rifles
    Replies: 2
    Last Post: 07-26-2011, 04:19 PM
  5. Ejector pin
    By possum1 in forum 110-Series Bolt-Action Rifles
    Replies: 5
    Last Post: 03-03-2010, 09:00 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •