Reply With QuoteEasiest thing to do is drill out the existing holes to 3/8" and then glue a piece of hardwood dowel into them. Trim flush and then you can use whatever screw spacing you want.
I did like to put a recoil pad on my older model 116 stock. Most of the screw hole spacing on the pads are 3.125” for the Savage 110 series. My holes spacing is 3.5”. Any idea what pads will fit this stock?
Easiest thing to do is drill out the existing holes to 3/8" and then glue a piece of hardwood dowel into them. Trim flush and then you can use whatever screw spacing you want.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
I thnk you’re right. Probably a good idea anyhow due to the hollow structure.Originally Posted by J.Baker
Posting Permissions
Bookmarks