Barrel channel is good.
Check this link for differences between the older actions and the newer E-Receiver to know which you have.
http://www.savageshooters.com/conten...er-Differences
Hi, I have a 9317th GV and would like to get a boyd stock, Will the below Boyd description fit my 93?
Thanks
Barrel Dimensions: Point A = 13/16" and Point B = 13/16
Center to Center of Action Screws: 3 11/16"Over All Length of Part: 27"Approximate weight: 2lbs 9oz
Comes with Boyds' 1/2" Rubber Recoil Pad.RIBarrel Dimensions: Point A = 13/16" and Point B = 13/16"Center to Center of Action Screws: 3 11/16"
Over All Length of Part: 31"
Comes with a 1/2" Rubber Recoil Pad.
Approximate weight: 2lbs 9oz
ATTENTION CUSTOMERS: This stock is designed for the Sav93-E/MKII heavy barrel with inlet trigger guard and floor plate. Action measures 7 3/4" long on the 93E/MKII action. Pre-93E receivers (with a lug at the back of the reciever) can be fit to our 93E/MKII stocks but will require fitting of your receiver and barrel to the stock. Minor gap will be visible on rear of stock with older pre-accutrigger actions. Older receivers are about 4 inches longer and will need to be fit. Variations in action mounting screw pillars exist between models. Do not over tighten.
This stock is designed for the Sav93-E/MKII heavy barrel with inlet trigger guard and floor plate. Action measures 7 3/4" long on the 93E/MKII action. Pre-93E receivers (with a lug at the back of the reciever) can be fit to our 93E/MKII stocks but will require fitting of your receiver and barrel to the stock. Minor gap will be visible on rear of stock with older pre-accutrigger actions. Older receivers are about 4 inches longer and will need to be fit. Variations in action mounting screw pillars exist between models.M FIREns: Point A = 13/16" and Point B = 13/16"
ULLARREL CHANNEL, STOCK, SKY LAMINATE
rel Dimensions: Point A = 13/16" and Point B = 13/16"
RIMFIRE VARMIT THUMBHOLE, SAVAGE® 93E MKII, BULL BARREL CHANNEL, STOCK, SKY LAMINATEBarrel Dimensions: Point A = 13/16" and Point B = 13/16"
This stock is designed for the Sav93-E/MKII heavy barrel with inlet trigger guard and floor plate. Action measures 7 3/4" long on the 93E/MKII action. Pre-93E receivers (with a lug at the back of the reciever) can be fit to our 93E/MKII stocks but will require fitting of your receiver and barrel to the stock. Minor gap will be visible on rear of stock with older pre-accutrigger actions. Older receivers are about 4 inches longer and will need to be fit. This stock is designed f
ogned
Barrel channel is good.
Check this link for differences between the older actions and the newer E-Receiver to know which you have.
http://www.savageshooters.com/conten...er-Differences
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Bookmarks