Welcome aboard
Very excited as I haven't been big into forums and such, but love to hunt, shoot, fish etc. I love to learn from those that have "been there and done that." I've owned two Savage rifles for 10+ years and recently bought a 12FV 6.5CM. I'm looking for advice on the fit/finish for a Boyd thumbhole and Vortex Viper HS 6-24x50 MIL that I've purchased for the rifle. It appears I need a different trigger guard and wonder about the base/rings to get the most out of the rifle and scope. If anyone can help with any of it, all of it or point me in the right direction with a specific forum subject/thread, I'd be much obliged. Thanks.
Welcome aboard
Welcome from northeast georgia
Ackley was right all along
Welcome from Gettysburg Pa
Perpetual Optimism is a force Multiplier....
howdy
My brother bought the 12FV about 2 years ago, and has been very happy with it. Boyds TH stock should work just fine (Measure action screw spacing to ensure you order the right one. Should be a short action with blind mag and factory barrel channel. You can open up the barrel channel with a dowel and sand paper. By brother put the Bobby Hart LRT on his. He did have to dremmel the trigger guard area a little bit to get his factory trigger guard to fit.
I have a Sightron SIII 6-24x50 on my 260 Rem. I used a 20 MOA Blackhawk rail and Blackhawk 6 hole tactical rings (MED) and it is the perfect height. 1/4" of clearance at most from the barrel. Just enough room to slide the Scope cover on.
Hope that helps some.
Thank you SageRat Shooter!
Welcome aboard!
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Welcome to the Newchum group mate.
Bookmarks