Boyds

**Minooka** · 01-17-2018, 01:17 PM

When ordering a boyds stock it tells to measure from point a to b ( example) but they don't have the pictorial showing what point a or b are

**olddav** · 01-17-2018, 01:41 PM

I'm thinking they are referring to the barrel (chamber and muzzle), but I would suggest you contact Boyd's.

**SageRat Shooter** · 01-17-2018, 01:46 PM

Action screw spacing is what you should measure... To make sure you order the correct stock so your action screws will fit in the new stock. Other than that, it's just left hand or right hand, standard barrel channel or Bull channel, and short or long action.

**DeadWoodDan** · 01-17-2018, 02:30 PM

This is what you want, just went through it on a Howa build.

Originally Posted by SageRat Shooter

Action screw spacing is what you should measure... To make sure you order the correct stock so your action screws will fit in the new stock. Other than that, it's just left hand or right hand, standard barrel channel or Bull channel, and short or long action.