Results 1 to 10 of 10

Thread: Second Barrel Swap

  1. #1
    Basic Member
    Join Date
    Jan 2016
    Location
    Star City, AR
    Posts
    156

    Smile Second Barrel Swap


    Went out to shop this afternoon and did my second Axis barrel swap. Took about an hour to do and was drinking coffee and watching basketball while working. This started out as a 243 and back in summer swapped it over to a 270 to use for deer hunting, carried it a few times but never had a chance to try it on a deer. Today changed it from 270 to 22-250 to try on coyotes with the new electronic call got for Christmas. This swap today was a lot easier and less nerve racking than the first one, all left to do in finish sighting in the scope and seeing something to shoot. Probably in summer will swap it to 30-06 for start of next deer season.

  2. #2
    Basic Member penna shooter's Avatar
    Join Date
    Mar 2016
    Location
    Gettysburg, Pa
    Posts
    571
    Congrats
    Perpetual Optimism is a force Multiplier....

  3. #3
    Basic Member
    Join Date
    Mar 2017
    Location
    Central Arizona
    Posts
    446
    You will love the 22-250 for coyotes. I have shot boatloads of them over the last 30 years, all called in with hand calls and the 22-250 just flat puts them down.

  4. #4
    Basic Member
    Join Date
    Nov 2016
    Posts
    384
    Whats your method for headspace?

  5. #5
    Basic Member
    Join Date
    Jan 2016
    Location
    Star City, AR
    Posts
    156
    I use go/no go gauges. If I'm going to swap barrels to me the only way to go is use gauges, not that expensive.

  6. #6
    Basic Member
    Join Date
    Nov 2016
    Posts
    384
    I used new and resized brass, I would rather use steel next time.

  7. #7
    Basic Member
    Join Date
    Jan 2016
    Location
    Star City, AR
    Posts
    156
    Quote Originally Posted by Evlshnngns View Post
    I used new and resized brass, I would rather use steel next time.
    I am not a reloader so I just bought new gauges for the calibers I have. Have 243 (20 and 22 inch) 7mm-08 and 308 that use same gauge, 270 (2) and 30-06 that use same gauge and the 22-250.

  8. #8
    Basic Member
    Join Date
    Jan 2016
    Location
    Star City, AR
    Posts
    156
    This is one of my two Axis with rattle can paint job.


    Sent from my iPhone using Tapatalk

  9. #9
    Basic Member
    Join Date
    Jan 2016
    Location
    Star City, AR
    Posts
    156
    Since our snow and cold temperatures are gone decided to shoot my build. First shot was on right to left but about 6 inches low, adjusted the scope to shoot again. Shooting at a large box so I could see where the impact was with a 3/4 inch orange dot, second shot was almost center in the dot and the third shot was touching the second shot. Needless to say I am really pleased with the way it shot, almost no recoil with the stock I had filled with rockite. Now to take my call and see if I can call and hit a coyote, that's the reason for building the 22-250.

  10. #10
    Basic Member
    Join Date
    Mar 2017
    Location
    Central Arizona
    Posts
    446
    Quote Originally Posted by Wayne Nixon View Post
    Since our snow and cold temperatures are gone decided to shoot my build. First shot was on right to left but about 6 inches low, adjusted the scope to shoot again. Shooting at a large box so I could see where the impact was with a 3/4 inch orange dot, second shot was almost center in the dot and the third shot was touching the second shot. Needless to say I am really pleased with the way it shot, almost no recoil with the stock I had filled with rockite. Now to take my call and see if I can call and hit a coyote, that's the reason for building the 22-250.
    Good luck, post up some pictures if you connect.

Similar Threads

  1. 7mm barrel swap
    By warrenf in forum 110-Series Rifles
    Replies: 7
    Last Post: 08-15-2016, 01:24 PM
  2. can i swap a sporter barrel to a heavy barrel? axis 223.
    By ohihunter2014 in forum Axis Series Rifles
    Replies: 4
    Last Post: 04-20-2015, 08:58 PM
  3. Replies: 8
    Last Post: 09-12-2013, 10:03 AM
  4. Replies: 2
    Last Post: 02-27-2013, 09:49 AM
  5. Need help with barrel swap
    By CRNA in forum 110-Series Rifles
    Replies: 16
    Last Post: 11-22-2010, 09:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •