What height scope rings are most people using? I have a short action savage with a 0 moa EGW rail and a 50mm scope. The bell is just about 3/8" away from the barrel, but the back of the bell is almost hitting the rail. I would like the bell of the scope to be closer to the barrel, but it doesn't seem possible with the rail. I have a medium height set of rings on there right now. They measure .380" from the base to the bottom of the scope. I was looking at the Burris XTR tactical rings, but the mediums are .500" from the base to the bottom of the scope and that will help me clear the rail, but put the bell even further away from the barrel.