Page 2 of 2 FirstFirst 12
Results 26 to 33 of 33

Thread: Who is getting the 224 Valkyrie?

  1. #26
    Basic Member
    Join Date
    Jun 2015
    Location
    Minnesota
    Posts
    799

    Am probably getting both AR and bolt rifle for this caliber. For the AR, 1:7 should be fine but bolt will need 1:6 for the heavier bullets. That's provided 100 or 105 gr bullets are made. They may not want to get into 243 territory but this caliber may just destroy other calibers if what's being posted about ballistics is true. Thought about going back to 6.5CM but since this came out, will be going 224 route instead. Be nice if savage would release the recon before SHOT show. My CC is standing by.

  2. #27
    Basic Member
    Join Date
    Jun 2015
    Location
    Minnesota
    Posts
    799

  3. #28
    Basic Member
    Join Date
    Mar 2015
    Posts
    64
    I have the Savage 224 Valkyrie. Decided to give it a shot. Shot it yesterday for the first time. It was AWESOME! After I got zeroed, I ran her out to 1120 yards with no problem with a 8mph 2o'clock wind. It was fun to shoot, that is why i bought it, little recoil, and you can see hits at distance. I used my 6.5 creedmoor data as a guide. It was pretty much spot on with the creedmoor, a little better at some distances than others. I was shooting Federal 90 grain. Overall very very fun!!!!

  4. #29
    Basic Member
    Join Date
    Jun 2015
    Location
    Minnesota
    Posts
    799
    Can you post your specs on your AR? Pics would be nice too. Shooting steel? Issues spotting impacts? Am waiting on more vendors to jump in building uppers and bolt rifles. Haven’t decided which way I want to go. That’s for the update.

  5. #30
    Basic Member
    Join Date
    Mar 2015
    Posts
    64
    Quote Originally Posted by bearcatrp View Post
    Can you post your specs on your AR? Pics would be nice too. Shooting steel? Issues spotting impacts? Am waiting on more vendors to jump in building uppers and bolt rifles. Haven’t decided which way I want to go. That’s for the update.

    It is the Savage 22939 model, 18 inch barrel, !:7 twist, Vortex PST Gen 2 Viper 5-25x50, 90 grain federal. I have swapped the UBR for the PST stock, that is just me because I like the PST the best. Yes, shooting steel and no issue spotting impact unless of course the mirage is terrible, but that is an environmental factor. Having a blast with this rifle. Will test it out in the near future with an Omega suppressor after a couple more hundred rounds.

  6. #31
    Basic Member
    Join Date
    Jun 2015
    Location
    Minnesota
    Posts
    799
    Why did you go with that model when savage sells the hunter for less money?

  7. #32
    Basic Member
    Join Date
    Mar 2015
    Posts
    64
    Quote Originally Posted by bearcatrp View Post
    Why did you go with that model when savage sells the hunter for less money?

    it was available and i like it. shoots awesome. this past weekend shot 930 yards, 8-12 mph winds, held 3.25 moa with the 224 and 4.75 with the 6.5 creedmoor. repeated the test with the 224 vs my buddies 6.5 creedmoor and overall from 500 to 800 the 224 was within 4 inches for elevation and wind compared to his creedmoor, and what was really interesting from 800 to 930 the 224 wind holds were less than his creedmoor. bottom line, this Valkyrie was tacking with the creedmoor. Very fun to shoot. Plan to do it again this upcoming weekend.

  8. #33
    Basic Member
    Join Date
    Jun 2015
    Location
    Minnesota
    Posts
    799
    Thanks for the information.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Build a .224 Valkyrie
    By copterdrvr in forum 110-Series Rifles
    Replies: 15
    Last Post: 07-13-2019, 09:06 AM
  2. Converting 223 to 224 Valkyrie
    By mwells72774 in forum Axis Series Rifles
    Replies: 1
    Last Post: 07-25-2018, 11:06 AM
  3. MSR15: New MSR15 Valkyrie shoots terrible
    By rfhall11 in forum Other Savage Centerfire Models
    Replies: 43
    Last Post: 06-04-2018, 06:38 PM
  4. 224 Valkyrie, new from Remington?
    By Texas10 in forum Ammunition & Reloading
    Replies: 24
    Last Post: 12-22-2017, 10:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •