Picked up my new Savage 11/111 Trophy Hunter 7mm Mag yesterday shipped from Bud's Guns. After reading several posts about the bad scope rings/mounts I got it home and the first thing I did was check the rings and mounts to see if they were loose. Guess what? Every screw including the stock screws were loose/ not torqued properly. Red Loc-tite for scope base screws, proper re-torque for all others. Should kick like a mule with that plastic stock but I wanted a light hunting rifle with a lot of punch. Load I have used in the past is a 140 grain Fusion with 70.0 grains of RL22 at about 3250 fps.