Picked up a 12fcv in 6.5 creed black friday. After having to clean up the front mount hole and have a gunsmith buddy modify tge egw rail I bought for it because the hole spacing was off. Finally got to shoot it.
4 shots Hornady black. Top one was zero shot at 100. Then cleaned it and shot the group below. Roughly 3/4".
Then 3 shots fgmm 130 berger. About 1"
Hornady american whitetail 129 gr sp about 1/2"
Another with the 129 Hornady. The 2 to the right I shot trying to focus on the vertical to make sure I was 2" high. Before moving the scope left I decided to bear down and center the diamond as a previous zero shot was dead on. I think If I did my oart it would one hole this load.
Overall very satisfied. I was planning on replacing the tupperware stock but not sure now lol. It is nose heavy but I don't want the over all weight much more. About 10# now dressed out. If Savage would answer my email may try to get the dbm parts off a 12fv. This centerfeed blind mag sucks loading. Looking at the bc m40 if I can get the savage parts.
Reply With Quote
Bookmarks