Reply With QuoteDifferent than the yellow stuff in the other triggers? I have not dealt with the red blade triggers, but I burn-off and pick-away at the yellow stuff on regular triggers routinely.
I swapped to a red blade trigger and need to make some adjustments, but the safety adjustment screw is filled with some compound from faactory. Anyone know what this is or how to defeat it? I cannot pull it out? Heat?
Different than the yellow stuff in the other triggers? I have not dealt with the red blade triggers, but I burn-off and pick-away at the yellow stuff on regular triggers routinely.
Use a dental pick or similar to remove. It’s a hard composite ball wedges in to prevent adjustment.
I ran into the same problem not that long ago and got a straight answer from sharpshooter. Here's a link
http://www.savageshooters.com/showth...ety-adjustment
I used a tiny drill bit to go through the center of the plastic "anti tamper" ball and then the rest came out easily with a dental pick
His knowledge of the proper 5/64 allen wrench to fit the safety adjustment screw saved me a lot of aggravation.
A good wife and a steady job has ruined many a great hunter.
Posting Permissions
Bookmarks