Results 1 to 13 of 13

Thread: Wilson Arms #4; #5.5; LV Contour Select Match Barrel Blanks - 160 shipped

  1. #1
    Advertiser
    Join Date
    Aug 2016
    Posts
    21

    Wilson Arms #4; #5.5; LV Contour Select Match Barrel Blanks - 160 shipped

    We have Wilson Arms contoured select match grade stainless barrel blanks available for $160 shipped - buy (5) for $750 shipped. Other Gunsmiths are encouraged to call!! Mix and match calibers and contours - not a problem on multi barrel discount.

    All barrels are stainless unless otherwise stated. Add $120 for flutes - 6 straight or $140 for 6 spiral - $280 shipped for a fluted Select Match grade barrel. Add 50 for caustic blueing - CM barrels only

    We offer a money back guarantee - buy the contoured blank and you don't like it - send it back and we will refund you or send another barrel - your choice - no questions asked!!

    The Wilson barrels we get are direct from Wilson and are the same quality barrels Cooper gets for their rifles - Select Match, contoured; button pulled; stress relieved; lapped; and air gauged to .0002". Most reports are these are 1/2 MOA barrels holding to 5/600 yards. These are the same quality barrels as a Douglass XX; Shilen Select Match; ect.

    We can turn any of the Wilson barrels into a Savage prefit for $240 shipped... You choice chambering and finish length. We have over 150+ reamers and counting... Probability is we have the reamer for the chambering you would like. If we don't we most likely will buy it to do the work!

    The contours we run are:

    #4 sporter - .685" at 26" - weighs about 3.20 lbs as a 27" blank. 3 lbs as a Savage prefit barrel
    5.5 heavy sporter - .750" at 26" weighs about 3.25 lbs. as a 27" blank. 3 lbs. as a prefit Savage
    LV - straight taper - .800" at 26" weighs about 4.50 lbs as a 27" blank 4.25+ as a prefit Savage

    Current inventory:

    .17 - 10 twist #4 contour
    .204 - 10 and 12 twist #4 and Light Varmint (LV) contour
    .224 - 8 and 12 twist #4 and Light Varmint (LV) contour
    6mm/.243 - 8 and 9 twist #4 - 8 twist Light Varmint contour
    .257 - 10 twist #4 contour
    6.5/.264 - 8 twist #4 and Light Varmint contour
    .270 - 10 twist #4 contour
    7mm/.284 - 8 and 9 twist #4 and Light Varmint contour
    7mm/.284 - 8.75 twist #4 - Chrome Moly (CM)
    .308 - 10 twist #4 and Light Varmint (LV) contour
    .338 - 10 twist #4 contour
    .338 - 10 twist #5.5 contour - Chrome Moly (CM)
    9.3/.366 - 14.2 twist #5.5 contour
    .358 - 12 twist #4 contour
    .375 - 12 twist #5.5 contour
    .416 - 14 twist #5.5 contour
    .457 - 20 twist Light Varmint contour
    .458 - 14 twist #5.5 contour

    We have a revolving account with Wilson for 100-200 barrels every month - if the above is not in stock it most likely will be in a matter of weeks... Thanks to all those who keep the volume of sales up so we can keep our prices down!!

    If you have questions don't hesitate to send a note to bookredsox@gmail.com...
    Last edited by Barrelbrothers; 12-10-2017 at 02:30 PM.

  2. #2
    Basic Member
    Join Date
    Nov 2017
    Location
    South of Boston
    Posts
    32
    Is the Savage profit $240 all in? Or is this just for threading and clambering and it is added to Barrel blank cost?
    when will you have 6.5 Grendel and 6.5 Creedmoor readers?

  3. #3
    Advertiser
    Join Date
    Aug 2016
    Posts
    21
    Quote Originally Posted by rbertalotto View Post
    Is the Savage profit $240 all in? Or is this just for threading and clambering and it is added to Barrel blank cost?
    when will you have 6.5 Grendel and 6.5 Creedmoor readers?
    The Wilson Arms Prefit barrels we offer for $240 are ready to drop in... Obviously you need the gauges and nut but the barrel is a finished prefit barrel. We offer the X-caliber prefit barrels for $320... Same thing - finished prefit ready to shoot! You pick chambering and finish length... Wilson 26" or less... X-caliber 27" or less.

    We have both the 6.5 Grendel and the 6.5 Creedmoor... We have over 150+ reamers now. Not all but most of the reamers are listed on our website - raggedholebarrels.net

  4. #4
    Team Savage
    Join Date
    Jan 2015
    Posts
    344
    Is your 5.5 heavy sporter a straight taper?

  5. #5
    Advertiser
    Join Date
    Aug 2016
    Posts
    21
    Quote Originally Posted by gbflyer View Post
    Is your 5.5 heavy sporter a straight taper?
    The #5.5 is a "sporter contour" tapers to .750" at 26"... We only run the big bore barrels in the #5.5

  6. #6
    Basic Member
    Join Date
    Mar 2017
    Posts
    85
    Would you happen to have a 7mm/.284 #4 contour in a 9.5 or 10 twist?

  7. #7
    Advertiser
    Join Date
    Aug 2016
    Posts
    21
    We have a few 7mm #4 10 twist fluted barrels remaining. We have those offered at $225 shipped on our website. Hope that helps!

  8. #8
    Basic Member
    Join Date
    Mar 2017
    Posts
    85
    Quote Originally Posted by Barrelbrothers View Post
    We have a few 7mm #4 10 twist fluted barrels remaining. We have those offered at $225 shipped on our website. Hope that helps!
    I don't see it on your website, but would these be Savage prefits?

  9. #9
    Advertiser
    Join Date
    Aug 2016
    Posts
    21
    Quote Originally Posted by 70oldsracer View Post
    I don't see it on your website, but would these be Savage prefits?
    The Wilson 7mm 10 twist fluted #4 being offered for $225 are contoured blanks... We can turn those barrels into a Savage prefit for $305 shipped for either the 7mm 10 twist #4 fluted or the .224 10 twist #4 fluted... The non-fluted Savage Prefit barrels start at $240. We only have a few of the .224 10 twist fluted and 7mm 10 twist fluted available. We can flute any of the non-fluted barrels for an additional $120 (6 straight) or $140 for (6 spiral).

  10. #10
    Team Savage
    Join Date
    Jan 2015
    Posts
    344
    After some email back and forth with John I placed an order this morning for a contoured blank. At a little bit after noon I have a shipping notice. Very happy with this company, great CS and communication.

  11. #11
    New Member
    Join Date
    Feb 2018
    Posts
    1
    Hi, I would like to purchase a #4 contour SS 6.5 1:8 twist barrel. Please advise me how to purchase. Thanks.

  12. #12
    Team Savage
    Join Date
    Jan 2015
    Posts
    344
    Quote Originally Posted by adjuster View Post
    Hi, I would like to purchase a #4 contour SS 6.5 1:8 twist barrel. Please advise me how to purchase. Thanks.
    I ordered off their website. raggedholebarrels.net

    Here's 2 pics from the lathe with the 30 cal LV John sent me a couple of weeks ago. I'm waiting for a recoil lug so I can finish it up and go shoot it.


  13. #13
    Advertiser
    Join Date
    Aug 2016
    Posts
    21
    You can order off our website... You'll need to create an account. After that it's add to cart and check out.

    Bare with the website - we are far from computer literate! If you have questions just send a note or give me a call!

Similar Threads

  1. Replies: 0
    Last Post: 11-12-2017, 02:52 PM
  2. Replies: 0
    Last Post: 07-15-2017, 01:25 PM
  3. Wilson Arms Pre-fit Savage Barrels - $240 shipped
    By Barrelbrothers in forum Ragged Hole Barrels
    Replies: 0
    Last Post: 02-02-2017, 10:07 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •