That should work fine. Just remember to check your firing pin protrusion.
I have a BVVS in 300 WSM. I'm going to change the barrel out with a .260 Rem barrel. Both are large shank. My current bolt is a CRF with a 1/2" head. I have the parts to change a short action push feed to .308 size cartridge. But it is 7/16" head. If I put those parts on my current bolt assemble and remove the CRF extractor piece from the action. Will it work? I am wondering if the firing pin is different also. Any info would be appreciated. Thanks
That should work fine. Just remember to check your firing pin protrusion.
"As long as there's lead in the air....there's still hope.."
Thanks, I need to find a 260 stagger feed box and follower, order a head space gauge and get to work!
Let me know if you're interested in swapping actions. I am looking for a wsm action with crf and have some standard actions.
Thanks but I think I'lll keep the action. I have 3 wsm actions. The other 2 are 7mm. One is a stock Weather Warrior the other is custom with a Match Barrel. It's an awesome cartridge. Can anyone tell me if Savage can supply a stagger feed box and follower?
Savage can.Can anyone tell me if Savage can supply a stagger feed box and follower?
Bookmarks