Stevens Model 200 22-250 Stock and DBM options

[Jungleboy]

Hey Guys,

Just picked up a Stevens model 200 22-250 and thinking of customizing her a little..

From what I can tell its a Gen 3 Short action (4.4" hole spacing and top bolt release)

It also has an inbuilt mag that stays in the stock once removed (Staggered feed by my accounts although nearly everything I've read on here suggests it should be "center feed"... Cartridges are definitely staggered when loaded into the mag )

I'm interested in Getting a Boyds AT-one stock (but for the savage 10/110) if that will work as I also want to do a detachable box magazine.

I've read a a lot of articles on here but want to be sure to order the right parts..

As to what model Savage to order the parts for also is there aftermarket bottom metal and magazines to suit the 22-250? The couple of companies that do magazines only seem to list them for the larger calibers like 3.08 and up...)

All help appreciated.
Cheers Jai

[foxx]

4.4 is center feed. Mag installed in the stock is center feed. Verdict...

center feed. :)

[Robinhood]

Yep.
Stevens 200 = model 10, 11, 12, 14, 16 top bolt release models