Reply With QuoteA short action RH .223 bolt head. You may need to open up the firing pin hole.
What do I need to change Striker bolt from 22-250 to 223?
Thanks;
joe b.
A short action RH .223 bolt head. You may need to open up the firing pin hole.
"As long as there's lead in the air....there's still hope.."
And an Allen WrenchOriginally Posted by sharpshooter
I just bought a 308 striker but I think I am going to go with a .243 barrel when varmint hunting and use the 55-58gr bullets.
The Striker bolt body has a bit punched through to the inside. This bit matches u shaped slots in the bolt head, essentially indexing the bolt head/bolt body. A new small-firing-pin-diameter bolt doesn't have the u shaped slots. Can I grind off the inside bolt body bit without causing any ill effects?
Thanks;
joe b.
Yes, that is the preferred solution.
"As long as there's lead in the air....there's still hope.."
Posting Permissions
Bookmarks