Chaps/gents/mates/bros/sir's........


This crazy guy has just picked up a 6.5c that he's gonna do some PRECISION/TAC work with and top two optics I'm buying are both 34mm tubes with 56mm obj. I want that scope obj to be a gnats eyelash off the barrel, yes i know all about harmonics, I am running the stock 0moa rail, no need for having a floating bubble and poopy angled relief when dialed back to a 200zero vs floating 30min thru the optic.... its got all the elevation and then some for beyond where id run a 6.5 (considering I run a 338LM ELR setup...)


So guy, what have you? Lowest pro no budget, if your running a 34mil tube and a 50obj I would presume that whatever your gap is -3mm would equate for a baseline on 0moa mount and honestly 20min rail at the mount can't be more more than basically nothing.



Thanks again, will spumy tons of pics vids, loading, tips tricks you name it, just don't want to play the put 1500$ on order and return the 5 that don't work game like I've done in the past.......