Ok I got my new barrel on used forester go/no go gauges to set headspace. Action has been timed and trued won't say who because I haven't had the chance to talk to them yet have contacted them but haven't heard back yet. Ok so after firing a round the bolt throw is nice and easy till the very end you almost lift the bolt all the way up then hit a wall and it gets hard. You can get it to open then it ejects the brass fine. What would cause this? It is shooting great sub half moa same load twice. Talked one guy he thought maybe to much headspace but said to resize a few pieces of 1 time fired brass and shoot it again to see what happens. But it's still doing it. Any ideas would be great.