Results 1 to 12 of 12

Thread: Model 16 lightweight or model 11 TH .223

  1. #1
    Jacklegg
    Guest

    Model 16 lightweight or model 11 TH .223


    Looking at picking up a bolt action .223. I'm on a budget. Under $600 and was curious which of these 2 are the best. I know I want it in .223. If there is a different model that you recommend let me know. Thanks for the help. Looking for pros and cons. Have a good one

  2. #2
    Basic Member
    Join Date
    Dec 2015
    Posts
    81
    I bought a 16 LWH in 6.5 Creedmoor. If you haven't shot a lightweight rifle before (mine was 6 lbs 11oz scope and rings) the need to be shot differently than a varmint or heavier barrel. The do not like free recoil so controlling the fore end is critical for accuracy although .223 won't be as jumpy as the Creedmoor was obviously.

    The rifle shot well but I got frustrated with load development. After 3 shots the barrel is hot and the amount of time for it to cool drove me crazy. I actually ordered a #4 contour barrel that should be here by Tuesday and I'm going to swap it.

    Full disclosure this was my first rifle with a sporter barrel not to mention the very lightweight barrel and I was working up loads in June and July. Let's say there was a lot of operator error early on that enhanced my final frustration.


    Sent from my iPad using Tapatalk

  3. #3
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    South Texas
    Age
    66
    Posts
    7,816
    Get t he cabelas Model 12 Savage for 419.
    The Dunning-Kruger effect is alive and well.

  4. #4
    Basic Member
    Join Date
    Feb 2017
    Location
    East Tennessee
    Posts
    57
    Really like my model 16 LWH in 6.5 creedmoor found a 2 great loads and 3 shot groups are ok with me then let barrel cool down it's a hunting weapon but it will shoot sub moa groups.

  5. #5
    Basic Member
    Join Date
    Feb 2013
    Location
    Grand Blanc, MI
    Age
    59
    Posts
    3,677
    If you haven't already, check out this review by Mr. Furious.
    http://www.savageshooters.com/conten...-223-Remington

    The TH and LWH are essentially the same quality. For all practical purposes, they will likely shoot, handle and function the same. Because the 16 is SS, I would recommend it over the TH.
    However, as Robinhood suggested, the 12FV from Cabelas is a better "deal" and I would add a better design. It is a top bolt release model, and therefore more practical/easy to use and more aftermarket trigger and stock options.

    Intended purpose and design is completely opposite extreme, though. It has a blind mag (top loading only, non detachable) and longer, heavy varmint barrel. It's intended for longer range target and varmint shooting. If you ever plan to do any customizing, it is the best option out there.

  6. #6
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,491
    Quote Originally Posted by Robinhood View Post
    Get t he cabelas Model 12 Savage for 419.
    Not everybody wants a long heavy barrel on their rifle.
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  7. #7
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,491
    Your decision basically boils down to whether or not you care about weight. The two rifles are pretty much identical in form and function, the difference is the 16 LWH has the lightened receiver and a 2" shorter barrel that's also a little thinner (due to the shorter length). That weight savings and the upgrade to stainless steel comes at a higher price though, so you have to decide if it's worth the extra money to you or not.

    Unlike some around here, I don't necessarily see the bottom bolt release as a definitive negative. From a functional standpoint it works - some are just to stubborn to take a couple minutes to figure out the trick to doing it that makes it just as quick and easy to use as the top bolt release. The limited aftermarket trigger options with it is true, but given how easy it is to work over an AccuTrigger to lighten them up I don't really see a need for an aftermarket trigger unless you're wanting something super light for benchrest. One can get down to a pound or so simply by swapping out the spring which is plenty light enough for most any need or use short of benchrest. Given the models you're looking at it's pretty clear this will be a hunting rifle so there's no need (or sense) for a trigger lighter than 1.5-2 pounds IMO.
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  8. #8
    Basic Member
    Join Date
    Sep 2013
    Location
    Holland, MI.
    Age
    62
    Posts
    764
    I'd just be happy with one of those fluted bolt bodies myself.

  9. #9
    Basic Member
    Join Date
    Feb 2013
    Location
    Grand Blanc, MI
    Age
    59
    Posts
    3,677
    And I agree 100% with everything Mr. Furious added.

  10. #10
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    South Texas
    Age
    66
    Posts
    7,816
    Quote Originally Posted by MrFurious View Post
    Not everybody wants a long heavy barrel on their rifle.
    I initially started my post suggesting the 16. It is what I prefer at this juncture. It holds its value and it is ...stainless. I merely added an option that could get the OP in the game quickly with room for a better scope than what the TH offers. The OP stated he was on a budget. Budget means compromise to me. Either way he goes, a lighter barrel or heavier barrel is chump change away.

    I like the bottom bolt release. It looks cleaner and is easier to operate. I am not much on the trigger guard and have modified all but one of mine to function without it.
    The Dunning-Kruger effect is alive and well.

  11. #11
    Basic Member
    Join Date
    Jun 2016
    Location
    Metairie LA
    Posts
    37
    I have a LWH in 223 and am loving it so far. My first loads went into less than an inch. That's a 3 shot group. The rifle is just a joy to shoot and carry.

  12. #12
    Team Savage
    Join Date
    Jul 2007
    Location
    Central Kentucky
    Age
    69
    Posts
    1,223
    Same stock and DBM on both. LWH barrel is 2 in. shorter and weight is about 6 oz less than the 22" factory sporter barrel. I like the looks of the LWH action with the fluted bolt, but weight is only about 2 oz less than standard Savage action. Thus the 16 TH XP with the scope included is a better overall value unless 2" in overall length and about 8 oz less weight are important.

Similar Threads

  1. Model 25: Model 25 lightweight Varminter in 204 Ruger
    By molecularmann in forum Other Savage Centerfire Models
    Replies: 3
    Last Post: 06-12-2012, 01:09 AM
  2. Model 11/111 Lightweight Hunter
    By Carvera in forum 110-Series Rifles
    Replies: 2
    Last Post: 07-25-2011, 10:35 PM
  3. model 11 lightweight hunter
    By RickinMo in forum 110-Series Rifles
    Replies: 5
    Last Post: 07-23-2011, 08:47 AM
  4. Model 11/111 Lightweight Hunters - 5 1/2 to 6 lb.
    By Bigfoot in forum 110-Series Rifles
    Replies: 36
    Last Post: 12-17-2010, 11:02 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •