Looks like there's a lot of problems with the 64 mags. Mine is a little weird, I think. 9 of the 10 run without a hitch, BUT the last one catches on the chamber entrance - looks like the bullet hits the bottom of the chamber. Read about loading fewer so I tried that - no joy. Even if I put only 2 in the mag, last one jams. I've used CCI Blazers, Mini Mags, and Stingers, Remington Yellow Jackets, Winchester Xperts and Armscor. And I did clean the rifle before trying again today. This has me stumped - always the last round. Any suggestions?
"Before a standing army can rule, the people must be disarmed, as they are in almost every country in Europe."
- Noah Webster
My 64 had bullets deforming on the sharp bottom edge of the chamber. I used a piece of 1000 grit sandpaper to gently sand the 6 o'clock position of the chamber and I have no more jams. It doesn't take much....piece of sandpaper on fingertip and gently rub. Don't overdo it.
Thanks Jimk. I'll give it a try
"Before a standing army can rule, the people must be disarmed, as they are in almost every country in Europe."
- Noah Webster
Posting Permissions
Reply With Quote
Bookmarks