Results 1 to 11 of 11

Thread: What's the silicone pad on the root of the bolt handle?

  1. #1
    Basic Member
    Join Date
    Sep 2016
    Posts
    28

    What's the silicone pad on the root of the bolt handle?


    When the silicone pad fell off the bolt handle of my model 12 lrpv the groups got larger with more flyers.

    I put it back on and the gun grouped noticeably tighter with fewer flyers.

    Anyone else notice this.

  2. #2
    Basic Member
    Join Date
    Apr 2017
    Location
    Behind Enemy Lines in WA State
    Posts
    274
    Probably there to cushion the bolt handle as it hits the action as the firing pin is released. That or to keep the bolt from closing more than necessary and having the cocking piece hit the ramp at the end of it's travel. If it works better with it, go with it.

    On another brand of rifle I built up the slot in the action with some Devcon so the Bolt couldn't be closes to the point the cocking piece hit the edge of the radius and made the bolt close more when firing.

  3. #3
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,788
    It is there to keep from tripping the sear on some models

  4. #4
    Basic Member
    Join Date
    Sep 2016
    Posts
    28
    Yeah I figured after adjusting the trigger too light and closing the bolt too hard the trigger "un-sets". and read the same here.

    im wondering if the cushion provided by the rubbery pad reduces variable vibrations from the huge bolt clanking into the receiver.

    Anywho, I saw a reduction in flyers with the rubbery cushion

  5. #5
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    South Texas
    Age
    66
    Posts
    7,804
    Picture?
    The Dunning-Kruger effect is alive and well.

  6. #6
    Basic Member
    Join Date
    Sep 2016
    Posts
    28
    I don't have pics. I'll see what I can do

  7. #7
    Basic Member
    Join Date
    Sep 2016
    Posts
    28
    Someone else posted this pic, it shows the silicone pad:

    http://photobucket.com/gallery/user/...4My5qcGc=?ref=

  8. #8
    Basic Member
    Join Date
    Jan 2013
    Location
    Alabama
    Age
    41
    Posts
    418
    Interesting. Neither one of my rifles have this. Is it something new?

  9. #9
    Basic Member RustyShackle's Avatar
    Join Date
    Apr 2016
    Location
    N.Ida
    Posts
    673
    That's the first time I'm seeing this also. Maybe dampens harmonics from a slight amount of movement. Interesting for sure.

  10. #10
    Basic Member
    Join Date
    Dec 2006
    Posts
    3,360
    The silicone pad was an ill attempt to reduce "accu-trips" on the 6 oz. version of the accutrigger. At some particular point they will fall off, resulting in the bolt over rotating, causing the cocking piece pin to interfere with the bottom of the cocking ramp. You are better off with a bolt handle that doesn't have the relief cut for the pad. Either build up the notch, or replace the bolt handle.
    "As long as there's lead in the air....there's still hope.."

  11. #11
    Team Savage 243LPR's Avatar
    Join Date
    Jun 2011
    Location
    E-town,Pa
    Posts
    1,132
    My LRP had one,lasted about 100rds and fell off. I think its mainly for the target actions with the red blade accutriggers.
    "An armed society is a polite society"
    "...shall not be infringed" What's the confusion?

Similar Threads

  1. Silicone and fishing weight in the stock
    By *tim* in forum 110-Series Rifles
    Replies: 31
    Last Post: 01-05-2013, 08:52 PM
  2. Bitter Root Valey ammo ( BVAC)
    By camoman83 in forum Ammunition & Reloading
    Replies: 1
    Last Post: 10-19-2010, 07:37 AM
  3. Mark I/II/93R: Savage MarkII TR tactical bolt handle! Can we buy the handle from Savage?
    By wcmd in forum Savage & Stevens Rimfire Rifles
    Replies: 11
    Last Post: 06-04-2010, 04:01 PM
  4. difficulty closing bolt with new bolt handle
    By phirebug in forum 110-Series Rifles
    Replies: 1
    Last Post: 04-23-2010, 08:01 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •