Results 1 to 5 of 5

Thread: Factory load for 308, shooting a model 12

  1. #1
    Basic Member
    Join Date
    Aug 2010
    Posts
    37

    Question Factory load for 308, shooting a model 12


    My new model 12 from Cabelas has shot the perfecta fmj from walmart really well. I am trying to find a good cartridge to hunt with that will allow the same accuracy. I would really be tickled to match the accuracy of that cheap Perfecta full metal jacket, wish I could find more of the stuff, but I need to go to the bench with some different cartridges to try to find one that this new 12 will like and shoot consistently. I know most of you guys probably load your own, as I did for a few years before life caught up with me, but I would love any comments or suggestions for something out of the box that you or someone you know has had accurate results. This little 147 Perfecta fmj flies real well out to 600yds and I am hoping for something comparable in a hunting cartridge.

  2. #2
    Basic Member
    Join Date
    May 2017
    Location
    McKinney, TX
    Posts
    36
    Depends on what you are hunting and how far of a shot you expect to take...

  3. #3
    Basic Member
    Join Date
    Aug 2010
    Posts
    37
    mostly deer or less, 300 -600 yds

  4. #4
    Basic Member Zero333's Avatar
    Join Date
    May 2016
    Location
    ON, Canada
    Posts
    783
    Federal Premium 165 gr Gameking.

    Superb accuracy and kills deer dead from up close to way out there.

    If you're gonna limit your range to within 400 yards, the Federal FUSION 165 or 180 gr are VERY accurate and kill deer very dead.

  5. #5
    Basic Member
    Join Date
    Aug 2010
    Posts
    37
    zero, thanks for this, I will pick up a box and give them a try. I will try the gameking first because of the place I hunt just might provide 500 yard opportunity

Similar Threads

  1. Matching a factory load
    By mbohuntr in forum Ammunition & Reloading
    Replies: 11
    Last Post: 04-14-2017, 12:51 PM
  2. Best factory load for 11 varmit
    By Wyoboy in forum 110-Series Rifles
    Replies: 5
    Last Post: 01-07-2017, 06:35 PM
  3. Factory load adjustment
    By powderburnz in forum Ammunition & Reloading
    Replies: 4
    Last Post: 11-08-2015, 02:26 PM
  4. Model 16 in 7mm-08 - factory load recommendations?
    By shinbone in forum Ammunition & Reloading
    Replies: 6
    Last Post: 09-02-2015, 09:33 AM
  5. Trying to duplicate factory .30-06 load
    By Sundo in forum Ammunition & Reloading
    Replies: 7
    Last Post: 12-17-2011, 12:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •