I'm going to rebarrel my Axix to .221 and I've been looking at the dies for it and there doesn't seem to be as large a selection as some calibers. Just wonder what you experienced Fireball shooters are using. I don't want to full length size my brass every loading; just neck size it. I've had good luck with the Lee collet neck sizing die in other calibers but I don't see one listed for the .221 Fireball. I've used L. E. Wilson dies with an arbor press in the past and wonder if that might be a good choice. I'd appreciate some suggestions that won't break my small budget......

Hank