Rail height on a 10ba stealth?

[Austaz]

Can someone measure the rail height on a 10ba stealth (above the barrel) please?

looking at scope and rings for one that is coming in a few weeks (left handed build), so far I have :
Athlon Cronus 5-29 is 1.3 inches to the center line.
Adm scout mount is either 1.19 or 1.55 high depending on the regular or low model.
Need to leave a bit of room for scope caps and the 20moa mount down angle (will keep the flat rail), guess 0.25 inches.

The rail looks to be about 0.25 to 0.5 inches above the barrel which means the low mount might just fit?

thanks.

[CBryars2]

Measured stock rail removed from my 10 BA. With calipers measured from the back, it is .43 from bottom center to top of picatiny and .29 from bottom center to bottom of picatiny.

Hope that helps

[Austaz]

Thanks for measuring. I'm not sure what bottom center is, I'm hoping it is the top of the barrel in which case I should have about 1/4 of an inch from top of barrel to bottom of the scope.

[CBryars2]

It is the curved bottom whichs rests on top of the curve of the barrel.