Results 1 to 9 of 9

Thread: 22 250 barrel wear

  1. #1
    New Member
    Join Date
    May 2017
    Posts
    8

    22 250 barrel wear


    Shootin a axis fatory 22 250. About how hany shots before accuracy starts to slide.

    Sent from my LG-H831 using Tapatalk

  2. #2
    Basic Member tric3imagery's Avatar
    Join Date
    Mar 2016
    Posts
    43
    I shoot Savage and Tika 22-250 , Savage is 10 yrs old and Tikka is 18yrs, rebarreled my Savage, it didn't need it but it's now a 6br,with a Shelia barrel, Tika I keep saying it's shot out but there's many thousands of rounds down them, what I'm getting to; is keep shooting and taking care of your rifle, you'll know when it's shot out. Biggest bad on my part I let my Tika develop a huge carbon problem, which took many many hours to clean up, it's still prone to building up carbon.

    Sent from my SM-T350 using Tapatalk

  3. #3
    Team Savage wbm's Avatar
    Join Date
    Dec 2006
    Location
    New Mexico
    Age
    80
    Posts
    2,641
    Depends on how much powder you burn and how fast you push the bullets.

  4. #4
    New Member
    Join Date
    May 2017
    Posts
    8
    Doin 31.5 benchmark with 55 grain hornady soft point

    Sent from my LG-H831 using Tapatalk

  5. #5
    New Member
    Join Date
    May 2017
    Posts
    8
    Doin 31.5 benchmark with 55 grain hornady soft point

    Sent from my LG-H831 using Tapatalk

  6. #6
    Basic Member
    Join Date
    Jan 2009
    Location
    Macon, GA
    Posts
    1,071
    Barrel wear for a 22-250 will be determined most by how you shoot, IMO. If you let the barrel properly cool, IE you only shoot 4 to 5 rounds then let the barrel cool, you'll extend the barrel life.
    They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.

  7. #7
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,487
    Have a friend with an old sporterized Mauser in .22-250 that he's been using to shoot groundhogs with on his farm since the late 1970's and he typically kills anywhere from 100 to 200 groundhogs a year on his property. Figuring 200/yr for 40 years that's 8,000 rounds which most here will agree is about 2-3 lifetimes for a 22-250 barrel. I bore scoped his barrel late last summer and it has about 10" of freebore in it at this point - meaning the rifling is completely gone for the first 10" after the chamber. Didn't stop him from killing over 170 groundhogs with it last spring/summer with most shots being in the 150-300 yard range.

    When I told him that his response was, "So what you're saying is I need a new rifle." I simply asked him if it still killed groundhogs and he said yes, to which I said, "as long as it's still kills what you point it at I'd keep using it."

    No clue how that rifle would print on paper with that worn of a barrel, but clearly it still shoots minute-of-groundhog out to 300 yards no problem. All depends on what level of accuracy you need or expect I guess.

  8. #8
    New Member
    Join Date
    May 2017
    Posts
    8
    Well this is now. Hope it stays

    Sent from my LG-H831 using Tapatalk

  9. #9
    Team Savage wbm's Avatar
    Join Date
    Dec 2006
    Location
    New Mexico
    Age
    80
    Posts
    2,641
    When I told him that his response was, "So what you're saying is I need a new rifle." I simply asked him if it still killed groundhogs and he said yes, to which I said, "as long as it's still kills what you point it at I'd keep using it."
    What? No new Bartlein!! This one made my morning. Sage advice Jim.

Similar Threads

  1. Mark I/II/93R: anybody wear out their mkII firing pin?
    By Lorenzo in forum Savage & Stevens Rimfire Rifles
    Replies: 2
    Last Post: 04-12-2017, 07:37 PM
  2. locking lug area wear
    By adam38654 in forum 110-Series Rifles
    Replies: 1
    Last Post: 06-02-2016, 03:18 PM
  3. Question on Barrel Set Back / Barrel Wear / and Powder.
    By wlleven in forum 110-Series Rifles
    Replies: 10
    Last Post: 11-24-2013, 11:41 PM
  4. Mark I/II/93R: Savage 93r17 TR bolt wear
    By liquidplasma in forum Savage & Stevens Rimfire Rifles
    Replies: 3
    Last Post: 05-16-2013, 07:58 AM
  5. Barrel wear question
    By Captk in forum Ammunition & Reloading
    Replies: 1
    Last Post: 12-17-2011, 11:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •