Scope base for model 10 round receiver

[Shooter71462]

I need a 2-piece base for my model 10. It needs to be 20 MOA. Any help would be appreciated.

[Robinhood]

2 pc 20 moa? Never seen one. There is a reason they don't make a 2 piece 20 MOA. What are you trying to accomplish ie... why does the one piece not work?

[hereinaz]

I need a 2-piece base for my model 10. It needs to be 20 MOA. Any help would be appreciated.

Go with regular bases and 20 MOA Signature rings with the inserts.

Sent from my SM-G920V using Tapatalk

[Shooter71462]

I have a top feed mag and concerned the one pc would get in the way.

[hereinaz]

I have a top feed mag and concerned the one pc would get in the way.

I have a one piece, and it does make it more difficult, but not impossible. It would not stop me.

Sent from my SM-G920V using Tapatalk

[Swissfan]

You could always get a one piece 20moa and cut the middle section out.

[LinemanBob]

The DNZ is one piece and also available in 20 moa. I love mine. I do have the LOW (no longer in production) and it works great.

[J.Baker]

The DNZ is one piece and also available in 20 moa. I love mine. I do have the LOW (no longer in production) and it works great.

What I think Bob meant to say here is that the DNZ GameReaper mount is a 1-piece unit, but it was designed NOT to block the loading/ejection port as the two rings are connected by a narrower piece that runs along the non-port side of the action. Top quality CNC machined aluminum mounts and as Bob noted they're available in 20 MOA. Great option for the blind magazine rifles.

[Scott Evans]

The one piece low profile units ala EGW, Nightforce etc. suck for top loading. The Ken Farrell units work well. I keep coming back to the Farrell, best Picatinny/Weaver one out there.

[J.Baker]

Farrell makes a nice base, but they're tall and can cause some cheek weld and eye alignment issues.

[DenverDave]

I need a 2-piece base for my model 10. It needs to be 20 MOA. Any help would be appreciated.

Here you go. Nightforce 20moa 2 piece base for Sav 10.

http://shop.opticsplanet.com/nightfo..._wwaAg5b8P8HAQ

Here it is cheaper:
https://www.midwayusa.com/product/64...und-rear-matte

[Shooter71462]

Thanks for all the help on this. I found a set of the medium Burris rings and used the +10. That left me around 1/10th of an inch between the scope and barrel.